Re: [net-next,v4,11/13] octeontx2-pf: cn20k: Add TC rules support

[Jakub Kicinski]

This is an AI-generated review of your patch. The human sending this
email has considered the AI review valid, or at least plausible.

For local reproduction steps see https://netdev-ai.bots.linux.dev/ai-local.html
---
octeontx2-pf: cn20k: Add TC rules support

This patch adds dynamic MCAM entry allocation for TC rules on CN20K
silicon, with support for X2/X4 key widths and entry shifting based on
rule priorities.

> diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
> index 26a08d2cfbb1..866d9451f5d6 100644
> --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c
> +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_tc.c

[ ... ]

> @@ -1292,7 +1277,23 @@ static int otx2_tc_add_flow(struct otx2_nic *nic,
>  	if (old_node)
>  		otx2_tc_del_flow(nic, tc_flow_cmd);
>
> +	if (is_cn20k(nic->pdev)) {
> +		rc = cn20k_tc_alloc_entry(nic, tc_flow_cmd, new_node, &dummy);
> +		if (rc) {
> +			NL_SET_ERR_MSG_MOD(extack,
> +					   "MCAM rule allocation failed");
> +			kfree_rcu(new_node, rcu);
> +			return rc;
> +		}
> +	}
> +
> +	entry = otx2_tc_update_mcam_table(nic, flow_cfg, new_node, true);
> +	if (entry < 0) {
> +		NL_SET_ERR_MSG_MOD(extack, "Adding rule failed");
> +		rc = entry;
> +		goto free_leaf;
> +	}
> +
>  	mutex_lock(&nic->mbox.lock);
>  	req = otx2_mbox_alloc_msg_npc_install_flow(&nic->mbox);
>  	if (!req) {
>  		mutex_unlock(&nic->mbox.lock);
>  		rc = -ENOMEM;
>  		goto free_leaf;
                ^^^^^^^^^^^^^^

For CN20K, if cn20k_tc_alloc_entry() succeeds (allocating an MCAM entry
from AF) but then otx2_mbox_alloc_msg_npc_install_flow() or
otx2_sync_mbox_msg() fails, the code goes to free_leaf. Looking at the
free_leaf cleanup path below, it calls otx2_tc_del_from_flow_list() and
kfree_rcu() but does not call cn20k_tc_free_mcam_entry() to return the
AF-allocated entry.

Is this leaking the MCAM entry on CN20K when these error paths are taken?

The cn20k_tc_update_mcam_table_add_req() function does call
cn20k_tc_free_mcam_entry() when it fails internally (due to X2/X4 mix),
suggesting MCAM entry cleanup is expected.

> @@ -1304,7 +1305,7 @@ static int otx2_tc_add_flow(struct otx2_nic *nic,
>  	memcpy(&dummy.hdr, &req->hdr, sizeof(struct mbox_msghdr));
>  	memcpy(req, &dummy, sizeof(struct npc_install_flow_req));

[ ... ]