Re: [PATCH v2 2/3] iommu/vt-d: Clear Present bit before tearing down context entry

From: Baolu Lu

Date: Wed Jan 21 2026 - 02:30:46 EST


On 1/21/26 14:23, Tian, Kevin wrote:
From: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Sent: Tuesday, January 20, 2026 2:18 PM

When tearing down a context entry, the current implementation zeros the
entire 128-bit entry using multiple 64-bit writes. This creates a window
where the hardware can fetch a "torn" entry — where some fields are
already zeroed while the 'Present' bit is still set — leading to
unpredictable behavior or spurious faults.

While x86 provides strong write ordering, the compiler may reorder writes
to the two 64-bit halves of the context entry. Even without compiler
reordering, the hardware fetch is not guaranteed to be atomic with
respect to multiple CPU writes.

Align with the "Guidance to Software for Invalidations" in the VT-d spec
(Section 6.5.3.3) by implementing the recommended ownership handshake:

1. Clear only the 'Present' (P) bit of the context entry first to
signal the transition of ownership from hardware to software.
2. Use dma_wmb() to ensure the cleared bit is visible to the IOMMU.
3. Perform the required cache and context-cache invalidation to ensure
hardware no longer has cached references to the entry.
4. Fully zero out the entry only after the invalidation is complete.

Also, add a dma_wmb() to context_set_present() to ensure the entry
is fully initialized before the 'Present' bit becomes visible.

Fixes: ba39592764ed2 ("Intel IOMMU: Intel IOMMU driver")
Reported-by: Dmytro Maluka <dmaluka@xxxxxxxxxxxx>
Closes: https://lore.kernel.org/all/aTG7gc7I5wExai3S@xxxxxxxxxx/
Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>

Reviewed-by: Kevin Tian <kevin.tian@xxxxxxxxx>

btw there is a context_clear_entry() for copied context entry in
device_pasid_table_setup(), but this patch doesn't touch that
path. It seems to assume that no in-flight DMA will exist at that
point:

if (context_copied(iommu, bus, devfn)) {
context_clear_entry(context);
...
/*
* At this point, the device is supposed to finish reset at
* its driver probe stage, so no in-flight DMA will exist,
* and we don't need to worry anymore hereafter.
*/
clear_context_copied(iommu, bus, devfn);

Is that guaranteed by all devices? from kdump feature p.o.v. if
that assumption is broken it just means potential DMA errors
in this transition window. But regarding to the issue which this
patch tries to fix, in-fly DMAs may lead to undesired behaviors
including memory corruption etc.

So, should it be fixed too?

This path is triggered when the device driver has probed the device
(ensuring it has been reset) and then calls the kernel DMA API for the
first time. At this stage, there should be no in-flight DMAs. We can
apply the same logic here to improve code readability, but this is not a
bug that requires a fix. Or not?

Thanks,
baolu