[PATCH v5 2/4] arm64: defconfig: Enable Glymur configs for boot to shell

[Pankaj Patil]

The serial engine must be properly setup before kernel reaches
"init", so UART driver and its dependencies needs to be built in.
Enable its dependency clocks,interconnect and pinctrl as built-in
to boot Qualcomm's dev platform - Glymur CRD board to UART console with
rootfs on nvme storage.
DISPCC enabled as module, used for display.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxxxxx>
Signed-off-by: Pankaj Patil <pankaj.patil@xxxxxxxxxxxxxxxx>
---
 arch/arm64/configs/defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c43dcadabec4..807881932132 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -645,6 +645,7 @@ CONFIG_PINCTRL_IMX91=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_IMX_SCMI=y
 CONFIG_PINCTRL_MSM=y
+CONFIG_PINCTRL_GLYMUR=y
 CONFIG_PINCTRL_IPQ5018=y
 CONFIG_PINCTRL_IPQ5332=y
 CONFIG_PINCTRL_IPQ5424=y
@@ -1452,6 +1453,9 @@ CONFIG_COMMON_CLK_MT8192_SCP_ADSP=y
 CONFIG_COMMON_CLK_MT8192_VDECSYS=y
 CONFIG_COMMON_CLK_MT8192_VENCSYS=y
 CONFIG_COMMON_CLK_QCOM=y
+CONFIG_CLK_GLYMUR_DISPCC=m
+CONFIG_CLK_GLYMUR_GCC=y
+CONFIG_CLK_GLYMUR_TCSRCC=m
 CONFIG_CLK_KAANAPALI_GCC=y
 CONFIG_CLK_KAANAPALI_TCSRCC=m
 CONFIG_CLK_X1E80100_CAMCC=m
@@ -1844,6 +1848,7 @@ CONFIG_INTERCONNECT_IMX8MN=m
 CONFIG_INTERCONNECT_IMX8MQ=m
 CONFIG_INTERCONNECT_IMX8MP=y
 CONFIG_INTERCONNECT_QCOM=y
+CONFIG_INTERCONNECT_QCOM_GLYMUR=y
 CONFIG_INTERCONNECT_QCOM_KAANAPALI=y
 CONFIG_INTERCONNECT_QCOM_MSM8916=m
 CONFIG_INTERCONNECT_QCOM_MSM8953=y

-- 
2.34.1