[PATCH v4 1/4] dt-bindings: crypto: ice: add operating-points-v2 property for QCOM ICE

[Abhinaba Rakshit]

Add support for specifying OPPs for the Qualcomm Inline Crypto Engine
by allowing the use of the standard "operating-points-v2" property in
the ICE device node. OPP-tabel is kept as an optional property.

Signed-off-by: Abhinaba Rakshit <abhinaba.rakshit@xxxxxxxxxxxxxxxx>
---
 .../bindings/crypto/qcom,inline-crypto-engine.yaml | 29 ++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
index c3408dcf5d2057270a732fe0e6744f4aa6496e06..1e849def1e0078feb45874a436411188d26cf37f 100644
--- a/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
+++ b/Documentation/devicetree/bindings/crypto/qcom,inline-crypto-engine.yaml
@@ -30,6 +30,14 @@ properties:
   clocks:
     maxItems: 1
 
+  operating-points-v2:
+    description:
+      Each OPP entry contains the frequency configuration for the ICE device
+      clock(s).
+
+  opp-table:
+    type: object
+
 required:
   - compatible
   - reg
@@ -46,5 +54,26 @@ examples:
                    "qcom,inline-crypto-engine";
       reg = <0x01d88000 0x8000>;
       clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+
+      operating-points-v2 = <&ice_opp_table>;
+
+      ice_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        opp-100000000 {
+          opp-hz = /bits/ 64 <100000000>;
+          required-opps = <&rpmhpd_opp_low_svs>;
+        };
+
+        opp-201500000 {
+          opp-hz = /bits/ 64 <201500000>;
+          required-opps = <&rpmhpd_opp_svs_l1>;
+        };
+
+        opp-403000000 {
+          opp-hz = /bits/ 64 <403000000>;
+          required-opps = <&rpmhpd_opp_nom>;
+        };
+      };
     };
 ...

-- 
2.34.1