[PATCH v2 11/20] usb: typec: fusb302: Remove IRQF_ONESHOT

[Sebastian Andrzej Siewior]

Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also disallows force-threading of the primary handler and the
irq-core will warn about this.

Remove IRQF_ONESHOT from irqflags.

Fixes: 309b6341d5570 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Acked-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Acked-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
---
Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
---
 drivers/usb/typec/tcpm/fusb302.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/usb/typec/tcpm/fusb302.c b/drivers/usb/typec/tcpm/fusb302.c
index 870a71f953f6c..19ff8217818e7 100644
--- a/drivers/usb/typec/tcpm/fusb302.c
+++ b/drivers/usb/typec/tcpm/fusb302.c
@@ -1756,8 +1756,7 @@ static int fusb302_probe(struct i2c_client *client)
 	}
 
 	ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
-			  IRQF_ONESHOT | IRQF_TRIGGER_LOW,
-			  "fsc_interrupt_int_n", chip);
+			  IRQF_TRIGGER_LOW, "fsc_interrupt_int_n", chip);
 	if (ret < 0) {
 		dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
 		goto tcpm_unregister_port;
-- 
2.51.0