Re: [PATCH V3 5/5] arm64: dts: qcom: glymur-crd: Enable ADSP and CDSP

[Konrad Dybcio]

On 1/29/26 1:13 AM, Sibi Sankar wrote:
> Enable ADSP and CDSP on Glymur CRD board.
> 
> Signed-off-by: Sibi Sankar <sibi.sankar@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/glymur-crd.dts | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/glymur-crd.dts b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> index 0899214465ac..0eed4faa8b07 100644
> --- a/arch/arm64/boot/dts/qcom/glymur-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/glymur-crd.dts
> @@ -487,6 +487,20 @@ &pon_resin {
>  	status = "okay";
>  };
>  
> +&remoteproc_adsp {
> +	firmware-name = "qcom/glymur/adsp.mbn",
> +			"qcom/glymur/adsp_dtb.mbn";
> +
> +	status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +	firmware-name = "qcom/glymur/cdsp.mbn",
> +			"qcom/glymur/cdsp_dtb.mbn";
> +
> +	status = "okay";
> +};

Please make sure it gets to L-F (only Kaanapali is there right now)

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad