Re: [PATCH v3 4/7] arm64: dts: qcom: sc8280xp: Add Venus

[Dikshita Agarwal]

On 1/25/2026 9:03 PM, Dmitry Baryshkov wrote:
> From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
> 
> Add the required nodes to enable Venus on sc8280xp.
> 
> [ bod: added interconnect tags ]
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
> [ johan: use sm8350 videocc defines ]
> Signed-off-by: Johan Hovold <johan+linaro@xxxxxxxxxx>
> [ bod: dropped video encoder/decoder declarations ]
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
> [ db: dropped llcc icc, switched to sc8280xp compat, added more freqs ]
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 89 ++++++++++++++++++++++++++++++++++
>  1 file changed, 89 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> index 41c57e7dc433..66a65ae50f00 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
> @@ -10,7 +10,9 @@
>  #include <dt-bindings/clock/qcom,rpmh.h>
>  #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
>  #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
> +#include <dt-bindings/clock/qcom,sm8350-videocc.h>
>  #include <dt-bindings/dma/qcom-gpi.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
>  #include <dt-bindings/interconnect/qcom,osm-l3.h>
>  #include <dt-bindings/interconnect/qcom,sc8280xp.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> @@ -691,6 +693,11 @@ reserved-region@85b00000 {
>  			no-map;
>  		};
>  
> +		pil_video_mem: pil_video_region@86700000 {
> +			reg = <0 0x86700000 0 0x500000>;
> +			no-map;
> +		};
> +
>  		pil_adsp_mem: adsp-region@86c00000 {
>  			reg = <0 0x86c00000 0 0x2000000>;
>  			no-map;
> @@ -4181,6 +4188,88 @@ usb_1_dwc3_ss: endpoint {
>  			};
>  		};
>  
> +		venus: video-codec@aa00000 {

Pls name this as iris instead of venus.

> +			compatible = "qcom,sc8280xp-venus";
> +			reg = <0 0x0aa00000 0 0x100000>;
> +			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +
> +			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
> +				 <&videocc VIDEO_CC_MVS0C_CLK>,
> +				 <&videocc VIDEO_CC_MVS0_CLK>;
> +			clock-names = "iface",
> +				      "core",
> +				      "vcodec0_core";
> +			power-domains = <&videocc MVS0C_GDSC>,
> +					<&videocc MVS0_GDSC>,
> +					<&rpmhpd SC8280XP_MX>;
> +			power-domain-names = "venus",
> +					     "vcodec0",
> +					     "mx";
> +
> +			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
> +			reset-names = "core";

should be names as 'bus'

> +
> +			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
> +					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
> +					<&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
> +					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
> +			interconnect-names = "cpu-cfg",
> +					     "video-mem";
> +
> +			operating-points-v2 = <&venus_opp_table>;

s/venus_opp_table/iris_opp_table

> +			iommus = <&apps_smmu 0x2e00 0x400>;
> +			memory-region = <&pil_video_mem>;
> +
> +			status = "disabled";
> +
> +			venus_opp_table: opp-table {
> +				compatible = "operating-points-v2";

Thanks,
Dikshita