[PATCH 45/46] comedi: rti802: Add sanity checks for I/O base address

[Ian Abbott]

The "rti800" driver uses an admin-supplied configuration option
(`it->options[0]`) to configure the I/O port base address of a RTI-802
board.  It currently allows any base address to be configured but the
hardware only supports base addresses (configured by on-board DIP
switches) in the range 0 to 0x3FC on 4-byte boundaries.

Add a sanity check to ensure the device is not configured at an
unsupported base address.

Signed-off-by: Ian Abbott <abbotti@xxxxxxxxx>
---
 drivers/comedi/drivers/rti802.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/comedi/drivers/rti802.c b/drivers/comedi/drivers/rti802.c
index d66762a22258..af990881c27a 100644
--- a/drivers/comedi/drivers/rti802.c
+++ b/drivers/comedi/drivers/rti802.c
@@ -72,7 +72,8 @@ static int rti802_attach(struct comedi_device *dev, struct comedi_devconfig *it)
 	int i;
 	int ret;
 
-	ret = comedi_request_region(dev, it->options[0], 0x04);
+	ret = comedi_check_request_region(dev, it->options[0], 0x04,
+					  0, 0x3ff, 4);
 	if (ret)
 		return ret;
 
-- 
2.51.0