Re: [PATCH 1/1] arm64: dts: qcom: lemans-evk: Add Mezzanine

[Umang Chheda]

Hello Konrad,

On 1/30/2026 4:21 PM, Konrad Dybcio wrote:
> On 1/29/26 6:28 PM, Umang Chheda wrote:
>> The Mezzanine is an hardware expansion add-on board designed
>> to be stacked on top of Lemans EVK.
>>
>> It has following peripherals :
>>
>> - 4x Type A USB ports in host mode.
>> - TC9563 PCIe switch, which has following three downstream ports (DSP) :
>>    - 1st DSP connects M.2 E-key connector for connecting WLAN endpoints.
>>    - 2nd DSP connects M.2 B-key connector for connecting cellular modems.
>>    - 3rd DSP with support for Dual Ethernet ports.
>> - eMMC.
>> - Additional 2.5GbE Ethernet PHY connected to native EMAC with support for
>>   MAC Address configuration via NVMEM.
>> - EEPROM.
>> - LVDS Display.
>> - 2*mini DP.
>>
>> Add support for following peripherals :
>> - TC9563 PCIe Switch.
>> - Additional 2.5GbE Ethernet Port.
>> - EEPROM.
>>
>> Written with inputs from :
>>     Mohd Ayaan Anwar <mohd.anwar@xxxxxxxxxxxxxxxx> - Ethernet.
>>     Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx> - PCIe
>>     Monish Chunara <monish.chunara@xxxxxxxxxxxxxxxx> - EEPROM.
>>
>> Signed-off-by: Umang Chheda <umang.chheda@xxxxxxxxxxxxxxxx>
>> ---
>>  arch/arm64/boot/dts/qcom/Makefile             |   4 +
>>  .../boot/dts/qcom/lemans-evk-mezzanine.dtso   | 301 ++++++++++++++++++
>>  2 files changed, 305 insertions(+)
>>  create mode 100644 arch/arm64/boot/dts/qcom/lemans-evk-mezzanine.dtso
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index f80b5d9cf1e8..79449004adfd 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -43,6 +43,10 @@ dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera.dtb
>>  lemans-evk-el2-dtbs := lemans-evk.dtb lemans-el2.dtbo
>>
>>  dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-el2.dtb
>> +
>> +lemans-evk-mezzanine-dtbs	:= lemans-evk.dtb lemans-evk-mezzanine.dtbo
>> +
>> +dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-mezzanine.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= milos-fairphone-fp6.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk.dtb
>>  dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-mezzanine.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-mezzanine.dtso
>> new file mode 100644
>> index 000000000000..a0dc6daec754
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/lemans-evk-mezzanine.dtso
>> @@ -0,0 +1,301 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
>> + */
>> +
>> +/dts-v1/;
>> +/plugin/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +&{/} {
>> +	model = "Qualcomm Technologies, Inc. Lemans-evk Mezzanine";
>> +
>> +	vreg_sys_pwr: regulator-vreg-sys-pwr {
>> +		compatible = "regulator-fixed";
>> +		regulator-name = "VREG_SYS_PWR";
>> +
>> +		regulator-always-on;
>> +		regulator-boot-on;
> nit: usually we put these at the end
Ack
>
> [...]
>
>> +&tlmm {
>> +	ethernet1_default: ethernet1-default-state {
>> +		ethernet1_mdc: ethernet1-mdc-pins {
> You can drop the labels for these inner entries, as you never
> reference them

Ack

>
> Konrad

Thanks,
Umang