Re: [PATCH] [v2] i3c, iio: fix i3c driver dependencies

[Jonathan Cameron]

On Mon, 2 Feb 2026 09:50:58 -0800
Guenter Roeck <linux@xxxxxxxxxxxx> wrote:

> On 2/2/26 08:04, Arnd Bergmann wrote:
> > From: Arnd Bergmann <arnd@xxxxxxxx>
> > 
> > All combined i2c/i3c drivers appear to suffer from the same link
> > time problem when CONFIG_I3C is set to 'm':
> > 
> > arm-linux-gnueabi-ld: drivers/iio/magnetometer/mmc5633.o: in function `mmc5633_i3c_driver_init':
> > mmc5633.c:(.init.text+0x30): undefined reference to `i3c_driver_register_with_owner'
> > 
> > This was previously fixed several times by marking individual
> > drivers as 'depends on I2C; depends on I3C || !I3C', but this gets
> > tedious and is somewhat confusing.
> > 
> > Add a Kconfig symbol 'I3C_OR_I2C' to help replace those dependencies,
> > and use this in all the existing drivers that had already fixed it
> > as well as the new mmc5633 driver.
> > 
> > Fixes: 6e5f6bf2e3f0 ("iio: magnetometer: Add mmc5633 sensor")
> > Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> > ---
> > v2: restore accidentally deleted lines
> > ---
> >   drivers/hwmon/Kconfig            |  6 ++----  
> 
> For hwmon:
> 
> Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
> 
Hi Arnd / All,

I applied a less good fix and the pull request has gone to Greg for
the IIO bug. I copied the hwmon config you have below.

So I'm absolutely in favour of this improvement but it's
probably a case of rebase after rc1 and it goes in next cycle.
Or maybe Greg could pick a rebased version up on top of char-misc-next?

So with it rebased,
Reviewed-by: Jonathan Cameron <jonathan.cameron@xxxxxxxxxx>


Jonathan

> >   drivers/i3c/Kconfig              | 12 ++++++++++++
> >   drivers/iio/magnetometer/Kconfig |  2 +-
> >   drivers/misc/amd-sbi/Kconfig     |  3 +--
> >   4 files changed, 16 insertions(+), 7 deletions(-)
> > 
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index 41c381764c2b..ecfba861f66d 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1493,8 +1493,7 @@ config SENSORS_LM73
> >   
> >   config SENSORS_LM75
> >   	tristate "National Semiconductor LM75 and compatibles"
> > -	depends on I2C
> > -	depends on I3C || !I3C
> > +	depends on I3C_OR_I2C
> >   	select REGMAP_I2C
> >   	select REGMAP_I3C if I3C
> >   	help
> > @@ -2392,8 +2391,7 @@ config SENSORS_TMP103
> >   
> >   config SENSORS_TMP108
> >   	tristate "Texas Instruments TMP108"
> > -	depends on I2C
> > -	depends on I3C || !I3C
> > +	depends on I3C_OR_I2C
> >   	select REGMAP_I2C
> >   	select REGMAP_I3C if I3C
> >   	help
> > diff --git a/drivers/i3c/Kconfig b/drivers/i3c/Kconfig
> > index 30a441506f61..626c54b386d5 100644
> > --- a/drivers/i3c/Kconfig
> > +++ b/drivers/i3c/Kconfig
> > @@ -22,3 +22,15 @@ menuconfig I3C
> >   if I3C
> >   source "drivers/i3c/master/Kconfig"
> >   endif # I3C
> > +
> > +config I3C_OR_I2C
> > +	tristate
> > +	default m if I3C=m
> > +	default I2C
> > +	help
> > +	  Device drivers using module_i3c_i2c_driver() can use either
> > +	  i2c or i3c hosts, but cannot be built-in for the kernel when
> > +	  CONFIG_I3C=m.
> > +
> > +	  Add 'depends on I2C_OR_I3C' in Kconfig for those drivers to
> > +	  get the correct dependencies.
> > diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
> > index 2b81b22c9550..448fef4e5716 100644
> > --- a/drivers/iio/magnetometer/Kconfig
> > +++ b/drivers/iio/magnetometer/Kconfig
> > @@ -143,7 +143,7 @@ config MMC5633
> >   	tristate "MEMSIC MMC5633 3-axis magnetic sensor"
> >   	select REGMAP_I2C if I2C
> >   	select REGMAP_I3C if I3C
> > -	depends on I2C || I3C
> > +	depends on I3C_OR_I2C
> >   	help
> >   	  Say yes here to build support for the MEMSIC MMC5633 3-axis
> >   	  magnetic sensor.
> > diff --git a/drivers/misc/amd-sbi/Kconfig b/drivers/misc/amd-sbi/Kconfig
> > index be022c71a90c..30e7fad7356c 100644
> > --- a/drivers/misc/amd-sbi/Kconfig
> > +++ b/drivers/misc/amd-sbi/Kconfig
> > @@ -1,10 +1,9 @@
> >   # SPDX-License-Identifier: GPL-2.0-only
> >   config AMD_SBRMI_I2C
> >   	tristate "AMD side band RMI support"
> > -	depends on I2C
> > +	depends on I3C_OR_I2C
> >   	depends on ARM || ARM64 || COMPILE_TEST
> >   	select REGMAP_I2C
> > -	depends on I3C || !I3C
> >   	select REGMAP_I3C if I3C
> >   	help
> >   	  Side band RMI over I2C/I3C support for AMD out of band management.  
>