[PATCH v4 07/13] iio: dac: ds4424: use fsleep() instead of usleep_range()

[Oleksij Rempel]

The DS4422/DS4424 and DS4402/DS4404 datasheets do not specify a minimum
delay between power-up (POR) and the availability of the I2C interface.

The driver previously used `usleep_range(1000, 1200)` to enforce a ~1ms
delay. Replace this with `fsleep(1000)` to allow the kernel to select the
most efficient sleep mechanism (usleep or msleep) while retaining the
existing conservative delay to ensure device readiness.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
changes v4:
- New patch
---
 drivers/iio/dac/ds4424.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/dac/ds4424.c b/drivers/iio/dac/ds4424.c
index 5709d8a39d7b..94803885d735 100644
--- a/drivers/iio/dac/ds4424.c
+++ b/drivers/iio/dac/ds4424.c
@@ -241,7 +241,13 @@ static int ds4424_probe(struct i2c_client *client)
 		return ret;
 	}
 
-	usleep_range(1000, 1200);
+	/*
+	 * The datasheet does not specify a power-up to I2C ready time.
+	 * Maintain the existing conservative 1ms delay to ensure the
+	 * device is ready for communication.
+	 */
+	fsleep(1000);
+
 	ret = ds4424_verify_chip(indio_dev);
 	if (ret < 0)
 		goto fail;
-- 
2.47.3