[PATCH 0/2] input: add GPIO-based charlieplex keypad

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Hello,
this patch series add a new GPIO charlieplex keypad driver.

I have tested the driver on a custom board with a Solidrun RZ/G2LC SOM
with three charlieplex keyboards, all connected thru a a PCA9416 I2C GPIO
expander.

Thank you.

Hugo Villeneuve (2):
  dt-bindings: input: add GPIO charlieplex keypad
  Input: charlieplex_keypad: add GPIO charlieplex keypad

 .../input/gpio-charlieplex-keypad.yaml        |  88 +++++++
 MAINTAINERS                                   |   7 +
 drivers/input/keyboard/Kconfig                |  14 ++
 drivers/input/keyboard/Makefile               |   1 +
 drivers/input/keyboard/charlieplex_keypad.c   | 223 ++++++++++++++++++
 5 files changed, 333 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/gpio-charlieplex-keypad.yaml
 create mode 100644 drivers/input/keyboard/charlieplex_keypad.c


base-commit: ed8a4ef29da3821ee3155d3b1925fa67fc92aae2
-- 
2.47.3