[PATCH 3/4] arm64: dts: qcom: pm7250b: Enable Qualcomm BCL device
From: Manaf Meethalavalappu Pallikunhi
Date: Thu Feb 05 2026 - 16:16:19 EST
Enable Qualcomm BCL hardware devicetree binding configuration
for pm7250b.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm7250b.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/pm7250b.dtsi b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
index 0761e6b5fd8d..69ad76831cde 100644
--- a/arch/arm64/boot/dts/qcom/pm7250b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm7250b.dtsi
@@ -202,6 +202,16 @@ pm7250b_gpios: gpio@c000 {
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ bcl@1d00 {
+ compatible = "qcom,pm7250b-bcl", "qcom,bcl-v1";
+ reg = <0x1d00>;
+ interrupts = <PM7250B_SID 0x1d 0x0 IRQ_TYPE_EDGE_RISING>,
+ <PM7250B_SID 0x1d 0x1 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "bcl-max-min",
+ "bcl-critical";
+ overcurrent-thresholds-milliamp = <5500 6000>;
+ };
};
pmic@PM7250B_SID1 {
--
2.43.0