[bug report] phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY config and DP mode support

[Dan Carpenter]

[ Smatch checking is paused while we raise funding.  #SadFace
  https://lore.kernel.org/all/aTaiGSbWZ9DJaGo7@stanley.mountain/ -dan ]

Hello Xiangxu Yin,

Commit 81791c45c8e0 ("phy: qcom: qmp-usbc: Add QCS615 USB/DP PHY
config and DP mode support") from Dec 15, 2025 (linux-next), leads to
the following Smatch static checker warning:

	drivers/phy/qualcomm/phy-qcom-qmp-usbc.c:803 qmp_v2_configure_dp_swing()
	index hardmax out of bounds '(*cfg->swing_tbl)[v_level]' size=4 max='4' rl='0-4'

drivers/phy/qualcomm/phy-qcom-qmp-usbc.c
    777 static int qmp_v2_configure_dp_swing(struct qmp_usbc *qmp)
    778 {
    779         const struct qmp_phy_cfg *cfg = qmp->cfg;
    780         const struct phy_configure_opts_dp *dp_opts = &qmp->dp_opts;
    781         void __iomem *tx = qmp->dp_tx;
    782         void __iomem *tx2 = qmp->dp_tx2;
    783         unsigned int v_level = 0, p_level = 0;
    784         u8 voltage_swing_cfg, pre_emphasis_cfg;
    785         int i;
    786 
    787         if (dp_opts->lanes > 4) {
    788                 dev_err(qmp->dev, "Invalid lane_num(%d)\n", dp_opts->lanes);
    789                 return -EINVAL;
    790         }
    791 
    792         for (i = 0; i < dp_opts->lanes; i++) {
    793                 v_level = max(v_level, dp_opts->voltage[i]);
    794                 p_level = max(p_level, dp_opts->pre[i]);
    795         }
    796 
    797         if (v_level > 4 || p_level > 4) {

These should be >= 4 instead of >.

    798                 dev_err(qmp->dev, "Invalid v(%d) | p(%d) level)\n",
    799                         v_level, p_level);
    800                 return -EINVAL;
    801         }
    802 
--> 803         voltage_swing_cfg = (*cfg->swing_tbl)[v_level][p_level];
                                    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This is a 4x4 array.

    804         pre_emphasis_cfg = (*cfg->pre_emphasis_tbl)[v_level][p_level];
    805 
    806         voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
    807         pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
    808 
    809         if (voltage_swing_cfg == 0xff && pre_emphasis_cfg == 0xff)
    810                 return -EINVAL;
    811 
    812         writel(voltage_swing_cfg, tx + QSERDES_V2_TX_TX_DRV_LVL);
    813         writel(pre_emphasis_cfg, tx + QSERDES_V2_TX_TX_EMP_POST1_LVL);
    814         writel(voltage_swing_cfg, tx2 + QSERDES_V2_TX_TX_DRV_LVL);
    815         writel(pre_emphasis_cfg, tx2 + QSERDES_V2_TX_TX_EMP_POST1_LVL);
    816 
    817         return 0;
    818 }

regards,
dan carpenter