Re: [PATCH v4 1/7] dma: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+

[Krzysztof Kozlowski]

On 09/02/2026 12:43, Md Sadre Alam wrote:
>>> that use BAM v1.6.0+, because the current code sets mask=0xffffffff
>>> for all commands. For read commands on newer BAM versions, this results
>>> in the hardware interpreting the destination address as 0xf_xxxxxxxx
>>> (invalid high memory) instead of the intended 0x0_xxxxxxxx address.
>>>
>>> Fixed this issue by:
>>> 1. Updating the bam_cmd_element structure documentation to reflect the
>>>     dual purpose of the mask field
>>> 2. Modifying bam_prep_ce_le32() to set appropriate mask values based on
>>>     command type:
>>>     - For read commands: mask = 0 (32-bit addressing, upper bits = 0)
>>>     - For write commands: mask = 0xffffffff (traditional write mask)
>>> 3. Maintaining backward compatibility with older BAM versions
>>>
>>> This fix enables proper NAND functionality on IPQ5424 and other platforms
>>> using BAM v1.6.0+ while preserving compatibility with existing systems.
>>
>> Fixes tag? CC-stable?
> 
> This patch is not fixing an existing commit. This is to address the 
> update in the newer version of the hardware.

Then "this fix" is misleading. Either you fix or not fix.


Best regards,
Krzysztof