[PATCH] arm64: dts: qcom: kodiak: Add I2S1 pinctrl definitions

[Luca Weiss]

Add the pinctrl definitions to configure gpio6-gpio9 of the lpass_tlmm
for I2S output.

Co-developed-by: Bharadwaj Raju <bharadwaj.raju@xxxxxxxxxxxxxx>
Signed-off-by: Bharadwaj Raju <bharadwaj.raju@xxxxxxxxxxxxxx>
Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/kodiak.dtsi | 52 ++++++++++++++++++++++++++++++++++++
 1 file changed, 52 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/kodiak.dtsi b/arch/arm64/boot/dts/qcom/kodiak.dtsi
index 6079e67ea829..2e53e99e86e4 100644
--- a/arch/arm64/boot/dts/qcom/kodiak.dtsi
+++ b/arch/arm64/boot/dts/qcom/kodiak.dtsi
@@ -3036,6 +3036,58 @@ lpass_dmic23_data: dmic23-data-state {
 				bias-pull-down;
 			};
 
+			lpass_i2s1_active: i2s1-active-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "i2s1_clk";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				ws-pins {
+					pins = "gpio7";
+					function = "i2s1_ws";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+
+				data-pins {
+					pins = "gpio8", "gpio9";
+					function = "i2s1_data";
+					drive-strength = <8>;
+					bias-disable;
+					output-high;
+				};
+			};
+
+			lpass_i2s1_sleep: i2s1-sleep-state {
+				clk-pins {
+					pins = "gpio6";
+					function = "i2s1_clk";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+
+				ws-pins {
+					pins = "gpio7";
+					function = "i2s1_ws";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+
+				data-pins {
+					pins = "gpio8", "gpio9";
+					function = "i2s1_data";
+					drive-strength = <2>;
+					bias-pull-down;
+					input-enable;
+				};
+			};
+
 			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";

---
base-commit: e1a106754a75d08a60acd0d72bff339d7cfe8c3a
change-id: 20260211-kodiak-i2s1-39effbe18ffc

Best regards,
-- 
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>