Re: [PATCH v2] arm64: dts: qcom: sm8550: Add UART15

[Konrad Dybcio]

On 2/11/26 11:35 PM, Aaron Kling via B4 Relay wrote:
> From: Xilin Wu <wuxilin123@xxxxxxxxx>
> 
> Add uart15 node for UART bus present on sm8550 SoC.
> 
> Signed-off-by: Molly Sophia <mollysophia379@xxxxxxxxx>
> Signed-off-by: Xilin Wu <wuxilin123@xxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> ---
> This patch was originally submitted as part of a series to support the
> AYN Odin 2 [0]. That series stalled, so submitting separately.
> 
> [0] https://lore.kernel.org/all/20240424-ayn-odin2-initial-v1-0-e0aa05c991fd@xxxxxxxxx/
> ---
> Changes in v2:
> - Use QCOM_ICC_TAG_ define in interconnect paths phandle third argument
> - Link to v1: https://lore.kernel.org/r/20260207-sm8550-uart15-v1-1-d8ccf746d102@xxxxxxxxx
> ---
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> index e3f93f4f412ded9583a6bc9215185a0daf5f1b57..a54f375f7f041a193a4396e4aa911abb42e3e6dc 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
> @@ -1251,6 +1251,22 @@ &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ACTIVE_ONLY>,
>  				#size-cells = <0>;
>  				status = "disabled";
>  			};
> +
> +			uart15: serial@89c000 {

This should be uart23 (see other nodes at this base addr have that index)

> +				compatible = "qcom,geni-uart";
> +				reg = <0 0x89c000 0 0x4000>;

Please pad the address to 8 hex digits with leading zeroes

[...]
> +			qup_uart15_default: qup-uart15-default-state {

And let's also update the name here

Konrad