[PATCH V2] arm64: dts: qcom: arduino-imola: fix faulty spidev node

[Riccardo Mereu]

From: Riccardo Mereu <r.mereu@xxxxxxxxxx>

CS pin added on pinctrl0 property is causing spidev to return -ENODEV
since that GPIO is already part of spi5 pinmuxing.

Fixes: 3f745bc0f11f ("arm64: dts: qcom: qrb2210: add dts for Arduino unoq")
Signed-off-by: Riccardo Mereu <r.mereu@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts | 8 --------
 1 file changed, 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
index 197ab6eb1666..796c1f7ff17c 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts
@@ -328,18 +328,10 @@ &spi5 {
 	spidev@0 {
 		reg = <0>;
 		compatible = "arduino,unoq-mcu";
-		pinctrl-0 = <&spidev_cs>;
-		pinctrl-names = "default";
 	};
 };
 
 &tlmm {
-	spidev_cs: spidev-cs-state {
-		pins = "gpio17";
-		function = "gpio";
-		drive-strength = <16>;
-	};
-
 	jmisc_gpio18: jmisc-gpio18-state {
 		pins = "gpio18";
 		function = "gpio";
-- 
2.53.0