[PATCH v2 2/2] phy: qcom: edp: Add per-version LDO configuration callback
From: Yongxing Mou
Date: Fri Feb 13 2026 - 02:32:17 EST
For eDP low Vdiff, the LDO setting depends on the PHY version, instead of
being a simple 0x0 or 0x01. Introduce the com_ldo_config callback to
correct LDO setting accroding to the HPG.
Since SC7280 uses different LDO settings than SA8775P/SC8280XP, introduce
qcom_edp_phy_ops_v3 to keep the LDO setting correct.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: f199223cb490 ("phy: qcom: Introduce new eDP PHY driver")
Signed-off-by: Yongxing Mou <yongxing.mou@xxxxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-edp.c | 86 ++++++++++++++++++++++++++++++++-----
1 file changed, 76 insertions(+), 10 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c
index ff14de41cb1c..6464df8d2a62 100644
--- a/drivers/phy/qualcomm/phy-qcom-edp.c
+++ b/drivers/phy/qualcomm/phy-qcom-edp.c
@@ -81,6 +81,7 @@ struct phy_ver_ops {
int (*com_clk_fwd_cfg)(const struct qcom_edp *edp);
int (*com_configure_pll)(const struct qcom_edp *edp);
int (*com_configure_ssc)(const struct qcom_edp *edp);
+ int (*com_ldo_config)(const struct qcom_edp *edp);
};
struct qcom_edp_phy_cfg {
@@ -304,7 +305,7 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
const struct qcom_edp_swing_pre_emph_cfg *cfg;
unsigned int v_level = 0;
unsigned int p_level = 0;
- u8 ldo_config;
+ int ret;
u8 swing;
u8 emph;
int i;
@@ -330,13 +331,13 @@ static int qcom_edp_set_voltages(struct qcom_edp *edp, const struct phy_configur
if (swing == 0xff || emph == 0xff)
return -EINVAL;
- ldo_config = edp->is_edp ? 0x0 : 0x1;
+ ret = edp->cfg->ver_ops->com_ldo_config(edp);
+ if (ret)
+ return ret;
- writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
writel(swing, edp->tx0 + TXn_TX_DRV_LVL);
writel(emph, edp->tx0 + TXn_TX_EMP_POST1_LVL);
- writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
writel(swing, edp->tx1 + TXn_TX_DRV_LVL);
writel(emph, edp->tx1 + TXn_TX_EMP_POST1_LVL);
@@ -560,6 +561,52 @@ static int qcom_edp_com_configure_pll_v4(const struct qcom_edp *edp)
return 0;
}
+static int qcom_edp_ldo_config_v3(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 ldo_config;
+
+ if (!edp->is_edp)
+ ldo_config = 0x0;
+ else if (dp_opts->link_rate <= 2700)
+ ldo_config = 0x81;
+ else
+ ldo_config = 0x41;
+
+ writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+ writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+
+ return 0;
+}
+
+static int qcom_edp_ldo_config_v4(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 ldo_config;
+
+ if (!edp->is_edp)
+ ldo_config = 0x0;
+ else if (dp_opts->link_rate <= 2700)
+ ldo_config = 0xc1;
+ else
+ ldo_config = 0x81;
+
+ writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+ writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+
+ return 0;
+}
+
+static const struct phy_ver_ops qcom_edp_phy_ops_v3 = {
+ .com_power_on = qcom_edp_phy_power_on_v4,
+ .com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4,
+ .com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v4,
+ .com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v4,
+ .com_configure_pll = qcom_edp_com_configure_pll_v4,
+ .com_configure_ssc = qcom_edp_com_configure_ssc_v4,
+ .com_ldo_config = qcom_edp_ldo_config_v3,
+};
+
static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
.com_power_on = qcom_edp_phy_power_on_v4,
.com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v4,
@@ -567,6 +614,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v4 = {
.com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v4,
.com_configure_pll = qcom_edp_com_configure_pll_v4,
.com_configure_ssc = qcom_edp_com_configure_ssc_v4,
+ .com_ldo_config = qcom_edp_ldo_config_v4,
};
static const struct qcom_edp_phy_cfg sa8775p_dp_phy_cfg = {
@@ -583,7 +631,7 @@ static const struct qcom_edp_phy_cfg sc7280_dp_phy_cfg = {
.vco_div_cfg = edp_phy_vco_div_cfg_v4,
.dp_swing_pre_emph_cfg = &dp_phy_swing_pre_emph_cfg,
.edp_swing_pre_emph_cfg = &edp_phy_swing_pre_emph_cfg_v3,
- .ver_ops = &qcom_edp_phy_ops_v4,
+ .ver_ops = &qcom_edp_phy_ops_v3,
};
static const struct qcom_edp_phy_cfg sc8280xp_dp_phy_cfg = {
@@ -768,12 +816,31 @@ static int qcom_edp_com_configure_pll_v6(const struct qcom_edp *edp)
return 0;
}
+static int qcom_edp_ldo_config_v6(const struct qcom_edp *edp)
+{
+ const struct phy_configure_opts_dp *dp_opts = &edp->dp_opts;
+ u32 ldo_config;
+
+ if (!edp->is_edp)
+ ldo_config = 0x0;
+ else if (dp_opts->link_rate <= 2700)
+ ldo_config = 0x51;
+ else
+ ldo_config = 0x91;
+
+ writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
+ writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
+
+ return 0;
+}
+
static const struct phy_ver_ops qcom_edp_phy_ops_v6 = {
.com_power_on = qcom_edp_phy_power_on_v6,
.com_resetsm_cntrl = qcom_edp_phy_com_resetsm_cntrl_v6,
.com_bias_en_clkbuflr = qcom_edp_com_bias_en_clkbuflr_v6,
.com_configure_pll = qcom_edp_com_configure_pll_v6,
.com_configure_ssc = qcom_edp_com_configure_ssc_v6,
+ .com_ldo_config = qcom_edp_ldo_config_v6,
};
static struct qcom_edp_phy_cfg x1e80100_phy_cfg = {
@@ -954,6 +1021,7 @@ static const struct phy_ver_ops qcom_edp_phy_ops_v8 = {
.com_clk_fwd_cfg = qcom_edp_com_clk_fwd_cfg_v8,
.com_configure_pll = qcom_edp_com_configure_pll_v8,
.com_configure_ssc = qcom_edp_com_configure_ssc_v8,
+ .com_ldo_config = qcom_edp_ldo_config_v6,
};
static struct qcom_edp_phy_cfg glymur_phy_cfg = {
@@ -969,7 +1037,6 @@ static int qcom_edp_phy_power_on(struct phy *phy)
const struct qcom_edp *edp = phy_get_drvdata(phy);
u32 bias0_en, drvr0_en, bias1_en, drvr1_en;
unsigned long pixel_freq;
- u8 ldo_config = 0x0;
int ret;
u32 val;
u8 cfg1;
@@ -978,11 +1045,10 @@ static int qcom_edp_phy_power_on(struct phy *phy)
if (ret)
return ret;
- if (edp->cfg->swing_pre_emph_cfg && !edp->is_edp)
- ldo_config = 0x1;
+ ret = edp->cfg->ver_ops->com_ldo_config(edp);
+ if (ret)
+ return ret;
- writel(ldo_config, edp->tx0 + TXn_LDO_CONFIG);
- writel(ldo_config, edp->tx1 + TXn_LDO_CONFIG);
writel(0x00, edp->tx0 + TXn_LANE_MODE_1);
writel(0x00, edp->tx1 + TXn_LANE_MODE_1);
--
2.43.0