[PATCH] arm64: dts: qcom: milos: Sort pinctrl subnodes by pins

[Luca Weiss]

As documented in the "Devicetree Sources (DTS) Coding Style" document,
pinctrl subnodes should be sorted by the pins property. Do this once for
milos.dtsi so that future additions can be added at the right places.

Signed-off-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/milos.dtsi | 54 ++++++++++++++++++-------------------
 1 file changed, 27 insertions(+), 27 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
index e1a51d43943f..bd9a11ea703d 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -1667,6 +1667,21 @@ tlmm: pinctrl@f100000 {
 
 			wakeup-parent = <&pdc>;
 
+			qup_spi0_data_clk: qup-spi0-data-clk-state {
+				/* MISO, MOSI, CLK */
+				pins = "gpio0", "gpio1", "gpio2";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
+			qup_spi0_cs: qup-spi0-cs-state {
+				pins = "gpio3";
+				function = "qup0_se0";
+				drive-strength = <6>;
+				bias-disable;
+			};
+
 			qup_i2c1_data_clk: qup-i2c1-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio4", "gpio5";
@@ -1683,29 +1698,6 @@ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
 				bias-pull-up = <2200>;
 			};
 
-			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
-				/* SDA, SCL */
-				pins = "gpio32", "gpio33";
-				function = "qup1_se0";
-				drive-strength = <2>;
-				bias-pull-up;
-			};
-
-			qup_spi0_cs: qup-spi0-cs-state {
-				pins = "gpio3";
-				function = "qup0_se0";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
-			qup_spi0_data_clk: qup-spi0-data-clk-state {
-				/* MISO, MOSI, CLK */
-				pins = "gpio0", "gpio1", "gpio2";
-				function = "qup0_se0";
-				drive-strength = <6>;
-				bias-disable;
-			};
-
 			qup_uart5_default: qup-uart5-default-state {
 				/* TX, RX */
 				pins = "gpio25", "gpio26";
@@ -1714,10 +1706,10 @@ qup_uart5_default: qup-uart5-default-state {
 				bias-disable;
 			};
 
-			qup_uart11_default: qup-uart11-default-state {
-				/* TX, RX */
-				pins = "gpio50", "gpio51";
-				function = "qup1_se4";
+			qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+				/* SDA, SCL */
+				pins = "gpio32", "gpio33";
+				function = "qup1_se0";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
@@ -1730,6 +1722,14 @@ qup_uart11_cts_rts: qup-uart11-cts-rts-state {
 				bias-pull-down;
 			};
 
+			qup_uart11_default: qup-uart11-default-state {
+				/* TX, RX */
+				pins = "gpio50", "gpio51";
+				function = "qup1_se4";
+				drive-strength = <2>;
+				bias-pull-up;
+			};
+
 			sdc2_default: sdc2-default-state {
 				clk-pins {
 					pins = "gpio62";

---
base-commit: 3daf23347bb5f4a375d0101ed29c97ce1a99721b
change-id: 20260213-milos-pinctrl-sort-16ed0fdb5aed

Best regards,
-- 
Luca Weiss <luca.weiss@xxxxxxxxxxxxx>