[PATCH 3/3] arm64: dts: qcom: msm8916-wiko-chuppito: add initial devicetree
From: Paul Adam via B4 Relay
Date: Sun Feb 15 2026 - 15:03:44 EST
From: Paul Adam <adamp@xxxxxxxxx>
Add an initial device tree for Wiko PULP 4G.
Includes support for:
- UART
- USB (no OTG)
- Internal storage
- MicroSD
- Volume keys + Power button
- Touchscreen
- Backlight
- Accelerometer: Invensense MPU6880
- Magnetometer: Asahi Kasei AK09911
- Hall sensor: Rohm BU52021HFV
- Proximity sensor
- Vibrator
- Earpiece
- Microphone 1
- Headphones
- Wifi
- Bluetooth
- GPU
Signed-off-by: Paul Adam <adamp@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts | 371 +++++++++++++++++++++
2 files changed, 372 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f80b5d9cf1e8..5a3a9a823503 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -75,6 +75,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-rossa.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-serranove.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-uf896.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-thwc-ufi001c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8916-wiko-chuppito.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86518.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt86528.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-wingtech-wt88047.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts
new file mode 100644
index 000000000000..9e185c8f8f54
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-wiko-chuppito.dts
@@ -0,0 +1,371 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-pm8916.dtsi"
+#include "msm8916-modem-qdsp6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-mpp.h>
+
+/ {
+ model = "Wiko Pulp 4G";
+ compatible = "wiko,chuppito", "qcom,msm8916";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* eMMC */
+ mmc1 = &sdhc_2; /* SD card */
+ serial0 = &blsp_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pm8916_pwm 0 100000>;
+ brightness-levels = <0 255>;
+ num-interpolated-steps = <255>;
+ default-brightness-level = <255>;
+ enable-gpios = <&tlmm 119 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&button_backlight_default>;
+ pinctrl-1 = <&button_backlight_off>;
+ pinctrl-names = "default", "off";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_keys_default>;
+ pinctrl-names = "default";
+ label = "GPIO Buttons";
+
+ button-volume-up {
+ label = "Volume up";
+ gpios = <&tlmm 107 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+ };
+
+ gpio-hall-sensor {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&gpio_hall_sensor_default>;
+ pinctrl-names = "default";
+ label = "GPIO Hall Effect Sensor";
+
+ event-hall-sensor {
+ label = "Hall Effect Sensor";
+ gpios = <&tlmm 117 GPIO_ACTIVE_LOW>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_LID>;
+ linux,can-disable;
+ };
+ };
+
+ usb_id: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+ pinctrl-0 = <&usb_id_default>;
+ pinctrl-names = "default";
+ };
+};
+
+&blsp_uart2 {
+ status = "okay";
+};
+
+&blsp_i2c2 {
+ status = "okay";
+
+ magnetometer@c {
+ compatible = "asahi-kasei,ak09911";
+ reg = <0x0c>;
+ vdd-supply = <&pm8916_l17>;
+ vid-supply = <&pm8916_l6>;
+ reset-gpios = <&tlmm 120 GPIO_ACTIVE_LOW>;
+ pinctrl-0 = <&mag_reset_default>;
+ pinctrl-1 = <&mag_reset_suspend>;
+ pinctrl-names = "default", "suspend";
+ mount-matrix = "1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "1";
+ };
+
+ proximity@48 {
+ // downstream devicetree only specifies "stk,stk3x1x"
+ compatible = "sensortek,stk3310";
+ reg = <0x48>;
+ interrupts-extended = <&tlmm 113 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-0 = <&proximity_int_default>;
+ pinctrl-1 = <&proximity_int_suspend>;
+ pinctrl-names = "default", "suspend";
+ };
+
+ imu@68 {
+ compatible = "invensense,mpu6880";
+ reg = <0x68>;
+ interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8916_l17>;
+ vddio-supply = <&pm8916_l6>;
+ pinctrl-0 = <&imu_int_default>;
+ pinctrl-1 = <&imu_int_suspend>;
+ pinctrl-names = "default", "suspend";
+ mount-matrix = "0", "-1", "0",
+ "-1", "0", "0",
+ "0", "0", "-1";
+ };
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ rmi4@39 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x39>;
+ interrupts-extended = <&tlmm 13 IRQ_TYPE_EDGE_FALLING>;
+ vdd-supply = <&pm8916_l17>;
+ vio-supply = <&pm8916_l6>;
+ pinctrl-0 = <&touchscreen_default>;
+ pinctrl-1 = <&touchscreen_suspend>;
+ pinctrl-names = "default", "suspend";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ syna,startup-delay-ms = <100>;
+ syna,reset-delay-ms = <160>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+// make sure gcc is probed with display disabled.
+&gcc {
+ clocks = <&xo_board>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mpss_mem {
+ reg = <0x0 0x86800000 0x0 0x5600000>;
+};
+
+&pm8916_l6 {
+ regulator-always-on;
+};
+
+&pm8916_pwm {
+ pinctrl-0 = <&pwm_out>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&pm8916_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&pm8916_rpm_regulators {
+ pm8916_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+};
+
+&pm8916_vib {
+ status = "okay";
+};
+
+&sdhc_1 {
+ status = "okay";
+};
+
+&sdhc_2 {
+ pinctrl-0 = <&sdc2_default>, <&sdc2_cd_default>;
+ pinctrl-1 = <&sdc2_sleep>, <&sdc2_cd_default>;
+ pinctrl-names = "default", "sleep";
+ cd-gpios = <&tlmm 38 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sound {
+ audio-routing =
+ "AMIC1", "MIC BIAS Internal1",
+ "AMIC2", "MIC BIAS Internal2",
+ "AMIC3", "MIC BIAS Internal1";
+};
+
+&usb {
+ extcon = <&usb_id>, <&usb_id>;
+ status = "okay";
+};
+
+&usb_hs_phy {
+ extcon = <&usb_id>;
+};
+
+&venus {
+ status = "okay";
+};
+
+&venus_mem {
+ status = "okay";
+};
+
+&wcnss {
+ status = "okay";
+};
+
+&wcnss_iris {
+ compatible = "qcom,wcn3620";
+};
+
+&wcnss_mem {
+ status = "okay";
+};
+
+&tlmm {
+ button_backlight_default: button-backlight-default-state {
+ pins = "gpio119";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ button_backlight_off: button-backlight-off-state {
+ pins = "gpio119";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+
+ gpio_keys_default: gpio-keys-default-state {
+ pins = "gpio107";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ gpio_hall_sensor_default: gpio-hall-sensor-default-state {
+ pins = "gpio117";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ imu_int_default: imu-int-default-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ imu_int_suspend: imu-int-suspend-state {
+ pins = "gpio115";
+ function = "gpio";
+ drive-strength = <2>;
+ };
+
+ mag_reset_default: mag-reset-default-state {
+ pins = "gpio120";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ mag_reset_suspend: mag-reset-suspend-state {
+ pins = "gpio120";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ proximity_int_default: proximity-int-default-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <6>;
+ bias-pull-up;
+ };
+
+ proximity_int_suspend: proximity-int-suspend-state {
+ pins = "gpio113";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ sdc2_cd_default: sdc2-cd-default-state {
+ pins = "gpio38";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ touchscreen_default: touchscreen-default-state {
+ touchscreen-pins {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+ };
+
+ touchscreen_suspend: touchscreen-suspend-state {
+ touchscreen-pins {
+ pins = "gpio13";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ reset-pins {
+ pins = "gpio12";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+ };
+
+ usb_id_default: usb-id-default-state {
+ pins = "gpio110";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-pull-up;
+ };
+};
+
+&pm8916_codec {
+ qcom,hphl-jack-type-normally-open;
+};
+
+&pm8916_mpps {
+ pwm_out: mpp4-state {
+ pins = "mpp4";
+ function = "digital";
+ power-source = <PM8916_MPP_VPH>;
+ output-low;
+ qcom,dtest = <1>;
+ };
+};
--
2.52.0