Re: [PATCH v2 20/25] media: i2c: imx283: Provide a full active pixels mode

[Jai Luthra]

Quoting Kieran Bingham (2026-02-13 19:31:59)
> Add a mode to support output of the full illuminated area of the pixel
> array.
> 
> Signed-off-by: Kieran Bingham <kieran.bingham@xxxxxxxxxxxxxxxx>

Reviewed-by: Jai Luthra <jai.luthra@xxxxxxxxxxxxxxxx>

> ---
>  drivers/media/i2c/imx283.c | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/drivers/media/i2c/imx283.c b/drivers/media/i2c/imx283.c
> index 4976c08c6832..d001bfb5e241 100644
> --- a/drivers/media/i2c/imx283.c
> +++ b/drivers/media/i2c/imx283.c
> @@ -523,6 +523,21 @@ static const struct imx283_mode supported_modes_12bit[] = {
>  
>                 .crop = imx283_native_area,
>         },
> +       {
> +               /* All illuminated pixels : 5496x3694 */
> +               .scan = &imx283_scan_modes[IMX283_MODE_0],
> +
> +               .width = 5496,
> +               .height = 3694,
> +               .min_hmax = 5914, /* 887 @ 480MHz/72MHz */
> +               .min_vmax = 3793, /* Lines */
> +
> +               /* 20.00 FPS */
> +               .default_hmax = 6000, /* 900 @ 480MHz/72MHz */
> +               .default_vmax = 4000,
> +
> +               .crop = imx283_active_area,
> +       },
>         {
>                 /* 20MPix 21.40 fps readout mode 0 */
>                 .scan = &imx283_scan_modes[IMX283_MODE_0],
> 
> -- 
> 2.52.0
>