Re: [PATCH 08/13] dt-bindings: serial: fsl-linflexuart: add clock input properties

[Krzysztof Kozlowski]

On 16/02/2026 16:02, Larisa Grigore wrote:
> From: Radu Pirea <radu-nicolae.pirea@xxxxxxx>
> 
> Add optional support for the two clock inputs used by the LINFlexD UART
> controller:
> - "lin": LIN_BAUD_CLK
> - "ipg": LINFLEXD_CLK
> 
> The clock inputs are kept optional to maintain compatibility with the
> S32V234 platform.

Does S32V234 have the clocks? I don't understand the "maintain
compatibility" in this context. Either you have or you have not clocks,
which should be expressed in schema (: false, see example schema).

> 
> Signed-off-by: Radu Pirea <radu-nicolae.pirea@xxxxxxx>
> Co-developed-by: Larisa Grigore <larisa.grigore@xxxxxxxxxxx>
> Signed-off-by: Larisa Grigore <larisa.grigore@xxxxxxxxxxx>
> ---
>  .../bindings/serial/fsl,s32-linflexuart.yaml   | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> index 4171f524a928..885f0b1b3492 100644
> --- a/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> +++ b/Documentation/devicetree/bindings/serial/fsl,s32-linflexuart.yaml
> @@ -34,6 +34,14 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  clocks:
> +    maxItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: lin
> +      - const: ipg
> +
>  required:
>    - compatible
>    - reg
> @@ -48,3 +56,13 @@ examples:
>          reg = <0x40053000 0x1000>;
>          interrupts = <0 59 4>;
>      };
> +
> +  - |
> +    serial@401c8000 {
> +        compatible = "nxp,s32g2-linflexuart",
> +                     "fsl,s32v234-linflexuart";
> +        reg = <0x401C8000 0x3000>;
> +        interrupts = <0 82 1>;
> +        clocks = <&clks 14>, <&clks 13>;
> +        clock-names = "lin", "ipg";

Just add the clocks to existing example. No need for new example for
each new property.

> +    };


Best regards,
Krzysztof