[PATCH 2/4] ARM: dts: imx: bx50v3: Configure phy-mode
From: Ian Ray
Date: Tue Feb 17 2026 - 08:00:29 EST
Set `phy-mode' on network switch CPU ports to eliminate a warning.
Signed-off-by: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts | 1 +
arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts | 1 +
3 files changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
index d994b32ad825..7326b8ad08cb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b450v3.dts
@@ -140,6 +140,7 @@ port@3 {
port@4 {
reg = <4>;
label = "cpu";
+ phy-mode = "gmii";
ethernet = <&switch_nic>;
phy-handle = <&switchphy4>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
index b0d345f5d071..9a43935be11c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b650v3.dts
@@ -139,6 +139,7 @@ port@3 {
port@4 {
reg = <4>;
label = "cpu";
+ phy-mode = "gmii";
ethernet = <&switch_nic>;
phy-handle = <&switchphy4>;
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
index cad112e05475..e7ccdcba2d5c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-b850v3.dts
@@ -286,6 +286,7 @@ port@3 {
port@4 {
reg = <4>;
label = "cpu";
+ phy-mode = "gmii";
ethernet = <&switch_nic>;
phy-handle = <&switchphy4>;
};
--
2.49.0