[PATCH 2/3] ARM: dts: tqma7: add boot phase properties
From: Alexander Feilke
Date: Wed Feb 18 2026 - 08:56:13 EST
Adds boot phase properties to essential resources in
tqma7 device trees.
Signed-off-by: Alexander Feilke <Alexander.Feilke@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi | 4 ++++
arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi | 2 ++
2 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
index 4d948a9757f9..03f2f2cbdfbc 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-mba7.dtsi
@@ -477,6 +477,7 @@ pinctrl_uart5: uart5grp {
};
pinctrl_uart6: uart6grp {
+ bootph-pre-ram;
fsl,pins =
<MX7D_PAD_EPDC_DATA08__UART6_DCE_RX 0x7d>,
<MX7D_PAD_EPDC_DATA09__UART6_DCE_TX 0x75>,
@@ -511,6 +512,7 @@ pinctrl_usdhc1: usdhc1grp {
<MX7D_PAD_SD1_DATA1__SD1_DATA1 0x5e>,
<MX7D_PAD_SD1_DATA2__SD1_DATA2 0x5e>,
<MX7D_PAD_SD1_DATA3__SD1_DATA3 0x5e>;
+ bootph-pre-ram;
};
pinctrl_usdhc1_100mhz: usdhc1_100mhzgrp {
@@ -602,6 +604,7 @@ &uart6 {
pinctrl-0 = <&pinctrl_uart6>;
assigned-clocks = <&clks IMX7D_UART6_ROOT_SRC>;
assigned-clock-parents = <&clks IMX7D_OSC_24M_CLK>;
+ bootph-pre-ram;
status = "okay";
};
@@ -646,6 +649,7 @@ &usdhc1 {
no-1-8-v;
no-sdio;
no-mmc;
+ bootph-pre-ram;
status = "okay";
};
diff --git a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
index 2966a33bc528..3a01b1cfb5fa 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx7-tqma7.dtsi
@@ -214,6 +214,7 @@ pinctrl_usdhc3: usdhc3grp {
<MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59>,
<MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59>,
<MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19>;
+ bootph-pre-ram;
};
pinctrl_usdhc3_100mhz: usdhc3_100mhzgrp {
@@ -288,6 +289,7 @@ &usdhc3 {
no-sdio;
vmmc-supply = <&vgen4_reg>;
vqmmc-supply = <&sw2_reg>;
+ bootph-pre-ram;
status = "okay";
};
--
2.43.0