Re: [PATCH] ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk

[Detlev Casanova]

Hi,

This could also use a

Reported-by: Luca Ceresoli <luca.ceresoli@xxxxxxxxxxx>

Luca, feel free to add your Tested-by as well :)

Detlev.

On 2/18/26 15:18, Detlev Casanova wrote:
> Drivers will not always call set_sysclk() for all clocks, especially when
> default mclk-fs can be used.
> When that is the case, use the clock rate set in the params multiplied by the
> default mclk-fs.
>
> Fixes: 5323186e2e8d ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback")
> Signed-off-by: Detlev Casanova <detlev.casanova@xxxxxxxxxxxxx>
> ---
>   sound/soc/rockchip/rockchip_i2s_tdm.c | 10 ++++++++++
>   1 file changed, 10 insertions(+)
>
> diff --git a/sound/soc/rockchip/rockchip_i2s_tdm.c b/sound/soc/rockchip/rockchip_i2s_tdm.c
> index 770b9bfbb384..fc52149ed6ae 100644
> --- a/sound/soc/rockchip/rockchip_i2s_tdm.c
> +++ b/sound/soc/rockchip/rockchip_i2s_tdm.c
> @@ -22,6 +22,7 @@
>   
>   #define DRV_NAME "rockchip-i2s-tdm"
>   
> +#define DEFAULT_MCLK_FS				256
>   #define CH_GRP_MAX				4  /* The max channel 8 / 2 */
>   #define MULTIPLEX_CH_MAX			10
>   
> @@ -665,6 +666,15 @@ static int rockchip_i2s_tdm_hw_params(struct snd_pcm_substream *substream,
>   			mclk_rate = i2s_tdm->mclk_rx_freq;
>   		}
>   
> +		/*
> +		 * When the dai/component driver doesn't need to set mclk-fs for a specific
> +		 * clock, it can skip the call to set_sysclk() for that clock.
> +		 * In that case, simply use the clock rate from the params and multiply it by
> +		 * the default mclk-fs value.
> +		 */
> +		if (!mclk_rate)
> +			mclk_rate = DEFAULT_MCLK_FS * params_rate(params);
> +
>   		err = clk_set_rate(mclk, mclk_rate);
>   		if (err)
>   			return err;