Re: [PATCH RESEND v2 1/5] media: dt-bindings: Add CAMSS device for SM8750

[Vijay Kumar Tumati]

Hi Bryan,

On 2/18/2026 4:50 PM, Bryan O'Donoghue wrote:
> On 20/01/2026 06:42, Hangxiang Ma wrote:
> > +      - description: Registers for ICP (Imaging Control Processor) 0
> > +      - description: Registers for ICP 0 SYS
> > +      - description: Registers for ICP 1
> > +      - description: Registers for ICP 1 SYS
> > +      - description: Registers for IPE (Image Processing Engine)
> > +      - description: Registers for JPEG DMA & Downscaler 0
> > +      - description: Registers for JPEG Encoder 0
> > +      - description: Registers for JPEG DMA & Downscaler 1
> > +      - description: Registers for JPEG Encoder 1
> > +      - description: Registers for OFE (Offline Front End)
>
> This is a weird map - it doesn't seem to have a BPS ?
There is no BPS module on SM8750.
> > +      - description: Registers for RT CDM (Camera Data Mover) 0
> > +      - description: Registers for RT CDM 1
> > +      - description: Registers for RT CDM 2
> > +      - description: Registers for RT CDM 3
> > +      - description: Registers for RT CDM 4
>
> I actually think these should be standalone nodes.
>
> I've done some prototyping work on Hamoa to bring up the BPS and IPE 
> using the ICP and the HFI protocol.
>
> An absolute torrent of TLAs there but one thing that pops out of that is 
> the current CAMSS bindings we have kind of match how camx works when 
> there is an ICP.
>
> Linux/HLOS programs up the PHYs, CSID, IFE, sensor and then the ICP is 
> tasked with owning the BPS, IPE and hiding away the complexity of the CDM.
>
> So to me that says we should keep CAMSS bindings as they are largely.
>
> I think its just messy to keep jamming registers into this map - it 
> really is an enormous list.
>
> Lets revert to the simpler version and add new nodes as we enable them 
> for OPE, IPE, BPS and ICP instead.
>
> OTOH I will publish the CSIPHY code you were asking for either tomorrow 
> Thursday or Friday and I'd be obliged if you could review and ideally 
> align with that.
>
> A humongous blob of a camera block seems like a legacy sin we should 
> just fix.
I am not sure I followed this entirely. Firstly, you weren't referring 
to the RT CDM register blocks (although you added your comment there), 
are you? Secondly, I thought you wanted the complete HW description as 
it is supposed to be in the DT bindings, isn't it? I am not sure why you 
think it is based on how CAMX works, rather purely based on the HW 
blocks and registers available in the Camera sub system on SM8750 and it 
is up to the driver, whether or not to use the ICP for offline modules, 
although using ICP is generally advised for the stripe based processing.

CSIPHY nodes - sure, if you advise that, we can.
> ---
> bod

Thanks,
Vijay.