DMIC support on AMD RPL platform produces I/O error after quirk addition

[Jason Mo]

Approximately one year ago, I raised a concern regarding the lack of DMIC support for AMD Raphael (RPL) platforms in the following thread:
https://lore.kernel.org/linux-sound/BY5PR07MB66126978095912E5D4A26E50A1802@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/T/#u

Recently, I noticed the patch series submitted at:
https://lore.kernel.org/linux-sound/20260213055904.110256-1-qby140326@xxxxxxxxx/T/#u
which adds initial DMIC support for these platforms. After applying the relevant changes and adding my device to the quirk list, the DMIC capture device is now correctly enumerated by the kernel.

However, when attempting to record audio, the operation fails with an I/O error. Below are the reproduction steps and corresponding logs from a Gentoo live environment:

gentoo@livecd ~ $ arecord -l
**** List of CAPTURE Hardware Devices ****
card 2: Generic_1 [HD-Audio Generic], device 0: SN6140 Analog [SN6140 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 3: acp6x [acp6x], device 0: DMIC capture dmic-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
gentoo@livecd ~ $ arecord -D hw:3,0 -f S32_LE -r 48000 -c 2 -d 10 /tmp/test.wav
Recording WAVE '/tmp/test.wav' : Signed 32 bit Little Endian, Rate 48000 Hz, Stereo
arecord: pcm_read:2272: read error: Input/output error
gentoo@livecd ~ $

The device node appears functional at the ALSA layer, but data transfer fails during capture. No obvious dmesg errors appear during device initialization beyond the I/O failure.

Could you kindly advise whether further logs (e.g., ftrace, ACP debug registers) would be helpful for diagnosis?
I am happy to provide additional system information, test patches, or perform targeted debugging as needed.

thanks,
Jason Mo