[PATCH v3] ARM: dts: aspeed: anacapa: Add retimer EEPROMs

[Dirk Chen via B4 Relay]

From: Dirk Chen <dirkchen@xxxxxxx>

The Anacapa board features Atmel 24C2048 EEPROMs on i2c0 and i2c1, which
are used to store retimer configurations. Add the corresponding device
tree nodes to support these components.

Signed-off-by: Dirk Chen <dirkchen@xxxxxxx>
---
Changes in v3:
- Reorder I2C device nodes by ascending address (place eeprom@50
  before i2c-mux@70)
- Link to v2: https://lore.kernel.org/r/20260209-b4-anacapa-dts-fix-v2-1-fe446a7038bf@xxxxxxx

Changes in v2:
- Improved commit description to clarify that the change reflects
  actual hardware as requested by the reviewer.
- Removed mentions of other platforms to avoid confusion.
- Link to v1: https://lore.kernel.org/r/20260202-b4-anacapa-dts-fix-v1-1-20d4b0114854@xxxxxxx
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
index 221af858cb6b..1502773d9c30 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-anacapa.dts
@@ -300,6 +300,12 @@ &gpio1 {
 &i2c0 {
 	status = "okay";
 
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
 	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;
@@ -334,6 +340,12 @@ i2c0mux0ch3: i2c@3 {
 &i2c1 {
 	status = "okay";
 
+	eeprom@50 {
+		compatible = "atmel,24c2048";
+		reg = <0x50>;
+		pagesize = <128>;
+	};
+
 	i2c-mux@70 {
 		compatible = "nxp,pca9546";
 		reg = <0x70>;

---
base-commit: 4c87cdd0328495759f6e9f9f4e1e53ef8032a76f
change-id: 20260202-b4-anacapa-dts-fix-207ffe9a3b0c

Best regards,
-- 
Dirk Chen <dirkchen@xxxxxxx>