[PATCH] nfc: nxp-nci: allow GPIOs to sleep

[Ian Ray]

Allow the firmware and enable GPIOs to sleep.

This fixes a `WARN_ON' and allows the driver to operate GPIOs which are
connected to I2C GPIO expanders.

-- >8 --
kernel: WARNING: CPU: 3 PID: 2636 at drivers/gpio/gpiolib.c:3880 gpiod_set_value+0x88/0x98
-- >8 --

Signed-off-by: Ian Ray <ian.ray@xxxxxxxxxxxxxxxx>
---
 drivers/nfc/nxp-nci/i2c.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/nfc/nxp-nci/i2c.c b/drivers/nfc/nxp-nci/i2c.c
index 6a5ce8ff91f0..b3d34433bd14 100644
--- a/drivers/nfc/nxp-nci/i2c.c
+++ b/drivers/nfc/nxp-nci/i2c.c
@@ -47,8 +47,8 @@ static int nxp_nci_i2c_set_mode(void *phy_id,
 {
 	struct nxp_nci_i2c_phy *phy = (struct nxp_nci_i2c_phy *) phy_id;
 
-	gpiod_set_value(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
-	gpiod_set_value(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
+	gpiod_set_value_cansleep(phy->gpiod_fw, (mode == NXP_NCI_MODE_FW) ? 1 : 0);
+	gpiod_set_value_cansleep(phy->gpiod_en, (mode != NXP_NCI_MODE_COLD) ? 1 : 0);
 	usleep_range(10000, 15000);
 
 	if (mode == NXP_NCI_MODE_COLD)
-- 
2.49.0