Re: [PATCH v5 1/2] dt-bindings: bluetooth: qcom,qcc2072-bt: add bindings for QCC2072

[Krzysztof Kozlowski]

On 20/02/2026 13:05, Vivek Sahu wrote:
> 
> 
> On 2/18/2026 5:23 PM, Krzysztof Kozlowski wrote:
>> On 18/02/2026 12:49, Vivek Sahu wrote:
>>> QCC2072 is a WiFi/BT connectivity radios which exposes
>>> UART as an interface for Bluetooth part.
>>> It requires different configuartions and firmware, so
>>
>> different than what?
>>
>> Also typo configurations.
>>
>>> document it as a new compatible string.
>>
>> Please wrap commit message according to Linux coding style / submission
>> process (neither too early nor over the limit):
>> https://elixir.bootlin.com/linux/v6.4-rc1/source/Documentation/process/submitting-patches.rst#L597
>>
> 
> Different configurations like interrupts GPIOs, firmware binaries, 
> compat string. Commit msg, I'll correct it in next patch of this commit.

I asked not what is different but against which this is different.
Different than <here goes explanation>?

> 
>>>
>>> Signed-off-by: Vivek Sahu <vivek.sahu@xxxxxxxxxxxxxxxx>
>>> ---
>>>   .../net/bluetooth/qcom,qcc2072-bt.yaml        | 47 +++++++++++++++++++
>>>   1 file changed, 47 insertions(+)
>>>   create mode 100644 Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
>>>
>>> diff --git a/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
>>> new file mode 100644
>>> index 000000000000..7b27c2c651fa
>>> --- /dev/null
>>> +++ b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
>>> @@ -0,0 +1,47 @@
>>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>>> +%YAML 1.2
>>> +---
>>> +$id: http://devicetree.org/schemas/net/bluetooth/qcom,qcc2072-bt.yaml#
>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>> +
>>> +title: Qualcomm QCC2072 Bluetooth
>>> +
>>> +maintainers:
>>> +  - Balakrishna Godavarthi <quic_bgodavar@xxxxxxxxxxx>
>>> +  - Rocky Liao <quic_rjliao@xxxxxxxxxxx>
>>> +
>>> +description:
>>> +  Qualcomm QCC2072 is a UART-based Bluetooth controller.
>>> +
>>> +properties:
>>> +  compatible:
>>> +    enum:
>>> +      - qcom,qcc2072-bt
>>> +
>>
>> Where are clocks?
>>
>> Where are supplies?
>>
> QCC2072 exposes M.2 UART as an interface for Bluetooth part. It doesn't 
> require clocks and voltage regulators to power it up.

Clocks, maybe, but power - I don't believe. AFAIK, sending radio
communication like Bluetooth requires energy. It is BLE, not BNE
(Bluetooth Non Energy)

> 
>>> +  enable-gpios:
>>> +    maxItems: 1
>>> +    description: GPIO specifier for the chip interrupt.
>>
>> Interrupt? No, it cannot be interrupt. This can be only enable pin and
>> then description is redundant. Look at other bindings.
>>
>> Looks like matching QCA2066, except missing clocks, or like other QCA
>> devices with proper supplies.
>>
>> I don't believe that Bluetooth device works without power.
>>
> It is an interrupt to the HOST. I'll make it more comprehensive in the 

Still not.

> next patch of this commit. QCC2072 exposes M.2 UART as an interface for 
> Bluetooth part. It doesn't require clocks and voltage regulators to 
> power it up.
> 
>>> +
>>> +required:
>>> +  - compatible
>>> +  - enable-gpios
>>> +
>>> +allOf:
>>> +  - $ref: bluetooth-controller.yaml#
>>> +  - $ref: qcom,bluetooth-common.yaml
>>> +  - $ref: /schemas/serial/serial-peripheral-props.yaml#
>>> +
>>> +unevaluatedProperties: false
>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/gpio/gpio.h>
>>> +    #include <dt-bindings/interrupt-controller/irq.h>
>>> +
>>> +    serial {
>>> +        bluetooth {
>>> +            compatible = "qcom,qcc2072-bt";
>>> +            enable-gpios = <&tlmm 19 IRQ_TYPE_EDGE_FALLING>;
>>> +            max-speed = <3200000>;
>>
>> No firmware?
>>
> 
> Firmware is required, it is just I've not added all the fields in the 
> example.


Add complete example.


Best regards,
Krzysztof