Re: [PATCH] riscv: Remove support for XIP kernel
From: Jisheng Zhang
Date: Fri Feb 20 2026 - 10:35:38 EST
On Fri, Feb 13, 2026 at 05:37:45PM +0800, Kunwu Chan wrote:
> Hi,
>
> Please don't remove CONFIG_XIP_KERNEL.
Can you plz show a real and valid usage of XIP with linux-riscv?
If we take a look at the code, it's obvious the XIP mess the riscv
arch code. So when people modifies the riscv arch code, they have to
take care of the XIP, the time spent here is a totally waste, the gain
does not compensate for the loss.
>
> Zhouyi Zhou zhouzhouyi@xxxxxxxxx <mailto:zhouzhouyi@xxxxxxxxx>and I are
> willing to take over
> maintainership and keep it build-tested and maintained going forward.
$ git log --oneline --author="Kunwu Chan" -- arch/riscv ':(exclude)arch/riscv/dts' |wc -l
0
$ git log --oneline --author="Zhouyi" -- arch/riscv ':(exclude)arch/riscv/dts' |wc -l
0
Sorry for being too hypercritical, but MAINTAINERS doesn't work like
this, I don't think a person can really maintain the riscv xip code
if he/she hasn't never upstreamed any patch to riscv arch source code.
The final result would be the maintainship is offloaded to patch authors
and riscv arch maintainers.
>
> We will send a MAINTAINERS patch shortly.
See above, how does a person who has never contributed one LoC to
coresponding code maintain the code?
>
>
> Thanx, Kunwu
>
> On 2/2/26 19:54, Nam Cao wrote:
> > XIP has a history of being broken for long periods of time. In 2023, it was
> > broken for 18 months before getting fixed [1]. In 2024 it was 4 months [2].
> >
> > And now it is broken again since commit a44fb5722199 ("riscv: Add runtime
> > constant support"), 10 months ago.
> >
> > These are clear signs that XIP feature is not being used.
> >
> > I occasionally looked after XIP, but mostly because I was bored and had
> > nothing better to do.
> >
> > Remove XIP support. Revert is possible if someone shows up complaining.
> >
> > Link: https://lore.kernel.org/linux-riscv/20231212-customary-hardcover-e19462bf8e75@wendy/ [1]
> > Link: https://lore.kernel.org/linux-riscv/20240526110104.470429-1-namcao@xxxxxxxxxxxxx/ [2]
> > Signed-off-by: Nam Cao <namcao@xxxxxxxxxxxxx>
> > Cc: Frederik Haxel <haxel@xxxxxx>
> > Cc: Vitaly Wool <vitaly.wool@xxxxxxxxxxxx>
> > ---
> > arch/riscv/Kconfig | 86 ++++++---------------
> > arch/riscv/Kconfig.socs | 8 +-
> > arch/riscv/Makefile | 3 -
> > arch/riscv/boot/Makefile | 11 ---
> > arch/riscv/include/asm/page.h | 29 --------
> > arch/riscv/include/asm/pgtable.h | 20 -----
> > arch/riscv/include/asm/scs.h | 1 -
> > arch/riscv/include/asm/set_memory.h | 2 +-
> > arch/riscv/include/asm/xip_fixup.h | 49 ------------
> > arch/riscv/kernel/head.S | 41 ----------
> > arch/riscv/kernel/head.h | 3 -
> > arch/riscv/kernel/setup.c | 6 +-
> > arch/riscv/kernel/suspend_entry.S | 2 -
> > arch/riscv/kernel/traps.c | 4 -
> > arch/riscv/kernel/vmcore_info.c | 7 --
> > arch/riscv/kernel/vmlinux.lds.S | 5 --
> > arch/riscv/mm/init.c | 111 ++--------------------------
> > 17 files changed, 37 insertions(+), 351 deletions(-)
> > delete mode 100644 arch/riscv/include/asm/xip_fixup.h
> >
> > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > index 7e76b6316425..e8ac6c61e27d 100644
> > --- a/arch/riscv/Kconfig
> > +++ b/arch/riscv/Kconfig
> > @@ -48,8 +48,8 @@ config RISCV
> > select ARCH_HAS_PTE_SPECIAL
> > select ARCH_HAS_SET_DIRECT_MAP if MMU
> > select ARCH_HAS_SET_MEMORY if MMU
> > - select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
> > - select ARCH_HAS_STRICT_MODULE_RWX if MMU && !XIP_KERNEL
> > + select ARCH_HAS_STRICT_KERNEL_RWX if MMU
> > + select ARCH_HAS_STRICT_MODULE_RWX if MMU
> > select ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
> > select ARCH_HAS_SYSCALL_WRAPPER
> > select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
> > @@ -85,7 +85,7 @@ config RISCV
> > select ARCH_WANT_FRAME_POINTERS
> > select ARCH_WANT_GENERAL_HUGETLB if !RISCV_ISA_SVNAPOT
> > select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
> > - select ARCH_WANT_LD_ORPHAN_WARN if !XIP_KERNEL
> > + select ARCH_WANT_LD_ORPHAN_WARN
> > select ARCH_WANT_OPTIMIZE_DAX_VMEMMAP
> > select ARCH_WANT_OPTIMIZE_HUGETLB_VMEMMAP
> > select ARCH_WANTS_NO_INSTR
> > @@ -130,13 +130,13 @@ config RISCV
> > select HAVE_ARCH_AUDITSYSCALL
> > select HAVE_ARCH_HUGE_VMALLOC if HAVE_ARCH_HUGE_VMAP
> > select HAVE_ARCH_HUGE_VMAP if MMU && 64BIT
> > - select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL
> > - select HAVE_ARCH_JUMP_LABEL_RELATIVE if !XIP_KERNEL
> > + select HAVE_ARCH_JUMP_LABEL
> > + select HAVE_ARCH_JUMP_LABEL_RELATIVE
> > select HAVE_ARCH_KASAN if MMU && 64BIT
> > select HAVE_ARCH_KASAN_VMALLOC if MMU && 64BIT
> > select HAVE_ARCH_KFENCE if MMU && 64BIT
> > select HAVE_ARCH_KSTACK_ERASE
> > - select HAVE_ARCH_KGDB if !XIP_KERNEL
> > + select HAVE_ARCH_KGDB
> > select HAVE_ARCH_KGDB_QXFER_PKT
> > select HAVE_ARCH_MMAP_RND_BITS if MMU
> > select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
> > @@ -154,7 +154,7 @@ config RISCV
> > select HAVE_CONTEXT_TRACKING_USER
> > select HAVE_DEBUG_KMEMLEAK
> > select HAVE_DMA_CONTIGUOUS if MMU
> > - select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
> > + select HAVE_DYNAMIC_FTRACE if MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
> > select FUNCTION_ALIGNMENT_4B if HAVE_DYNAMIC_FTRACE && RISCV_ISA_C
> > select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS if HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
> > select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS if (DYNAMIC_FTRACE_WITH_ARGS && !CFI)
> > @@ -162,7 +162,7 @@ config RISCV
> > select HAVE_FTRACE_GRAPH_FUNC
> > select HAVE_FUNCTION_GRAPH_TRACER if HAVE_DYNAMIC_FTRACE_WITH_ARGS
> > select HAVE_FUNCTION_GRAPH_FREGS
> > - select HAVE_FUNCTION_TRACER if !XIP_KERNEL && HAVE_DYNAMIC_FTRACE
> > + select HAVE_FUNCTION_TRACER if HAVE_DYNAMIC_FTRACE
> > select HAVE_EBPF_JIT if MMU
> > select HAVE_GENERIC_TIF_BITS
> > select HAVE_GUP_FAST if MMU
> > @@ -171,16 +171,16 @@ config RISCV
> > select HAVE_GCC_PLUGINS
> > select HAVE_GENERIC_VDSO if MMU
> > select HAVE_IRQ_TIME_ACCOUNTING
> > - select HAVE_KERNEL_BZIP2 if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_GZIP if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_LZ4 if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_LZMA if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_LZO if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_UNCOMPRESSED if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_ZSTD if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KERNEL_XZ if !XIP_KERNEL && !EFI_ZBOOT
> > - select HAVE_KPROBES if !XIP_KERNEL
> > - select HAVE_KRETPROBES if !XIP_KERNEL
> > + select HAVE_KERNEL_BZIP2 if !EFI_ZBOOT
> > + select HAVE_KERNEL_GZIP if !EFI_ZBOOT
> > + select HAVE_KERNEL_LZ4 if !EFI_ZBOOT
> > + select HAVE_KERNEL_LZMA if !EFI_ZBOOT
> > + select HAVE_KERNEL_LZO if !EFI_ZBOOT
> > + select HAVE_KERNEL_UNCOMPRESSED if !EFI_ZBOOT
> > + select HAVE_KERNEL_ZSTD if !EFI_ZBOOT
> > + select HAVE_KERNEL_XZ if !EFI_ZBOOT
> > + select HAVE_KPROBES
> > + select HAVE_KRETPROBES
> > # https://github.com/ClangBuiltLinux/linux/issues/1881
> > select HAVE_LD_DEAD_CODE_DATA_ELIMINATION if !LD_IS_LLD
> > select HAVE_MOVE_PMD
> > @@ -191,9 +191,9 @@ config RISCV
> > select HAVE_PERF_REGS
> > select HAVE_PERF_USER_STACK_DUMP
> > select HAVE_POSIX_CPU_TIMERS_TASK_WORK
> > - select HAVE_PREEMPT_DYNAMIC_KEY if !XIP_KERNEL
> > + select HAVE_PREEMPT_DYNAMIC_KEY
> > select HAVE_REGS_AND_STACK_ACCESS_API
> > - select HAVE_RETHOOK if !XIP_KERNEL
> > + select HAVE_RETHOOK
> > select HAVE_RSEQ
> > select HAVE_RUST if RUSTC_SUPPORTS_RISCV && CC_IS_CLANG
> > select HAVE_SAMPLE_FTRACE_DIRECT
> > @@ -214,7 +214,7 @@ config RISCV
> > select PCI_ECAM if (ACPI && PCI)
> > select PCI_MSI if PCI
> > select RELOCATABLE if !MMU && !PHYS_RAM_BASE_FIXED
> > - select RISCV_ALTERNATIVE if !XIP_KERNEL
> > + select RISCV_ALTERNATIVE
> > select RISCV_APLIC
> > select RISCV_IMSIC
> > select RISCV_INTC
> > @@ -541,7 +541,6 @@ endchoice
> >
> > config RISCV_ALTERNATIVE
> > bool
> > - depends on !XIP_KERNEL
> > help
> > This Kconfig allows the kernel to automatically patch the
> > erratum or cpufeature required by the execution platform at run
> > @@ -1129,7 +1128,6 @@ config PARAVIRT_TIME_ACCOUNTING
> >
> > config RELOCATABLE
> > bool "Build a relocatable kernel"
> > - depends on !XIP_KERNEL
> > select MODULE_SECTIONS if MODULES
> > select ARCH_VMLINUX_NEEDS_RELOCS
> > help
> > @@ -1146,7 +1144,7 @@ config RELOCATABLE
> > config RANDOMIZE_BASE
> > bool "Randomize the address of the kernel image"
> > select RELOCATABLE
> > - depends on MMU && 64BIT && !XIP_KERNEL
> > + depends on MMU && 64BIT
> > help
> > Randomizes the virtual address at which the kernel image is
> > loaded, as a security feature that deters exploit attempts
> > @@ -1236,7 +1234,7 @@ config EFI_STUB
> >
> > config EFI
> > bool "UEFI runtime support"
> > - depends on OF && !XIP_KERNEL
> > + depends on OF
> > depends on MMU
> > default y
> > select ARCH_SUPPORTS_ACPI if 64BIT
> > @@ -1287,44 +1285,6 @@ config PHYS_RAM_BASE
> > explicitly specified to run early relocations of read-write data
> > from flash to RAM.
> >
> > -config XIP_KERNEL
> > - bool "Kernel Execute-In-Place from ROM"
> > - depends on MMU && SPARSEMEM && NONPORTABLE
> > - # This prevents XIP from being enabled by all{yes,mod}config, which
> > - # fail to build since XIP doesn't support large kernels.
> > - depends on !COMPILE_TEST
> > - select PHYS_RAM_BASE_FIXED
> > - help
> > - Execute-In-Place allows the kernel to run from non-volatile storage
> > - directly addressable by the CPU, such as NOR flash. This saves RAM
> > - space since the text section of the kernel is not loaded from flash
> > - to RAM. Read-write sections, such as the data section and stack,
> > - are still copied to RAM. The XIP kernel is not compressed since
> > - it has to run directly from flash, so it will take more space to
> > - store it. The flash address used to link the kernel object files,
> > - and for storing it, is configuration dependent. Therefore, if you
> > - say Y here, you must know the proper physical address where to
> > - store the kernel image depending on your own flash memory usage.
> > -
> > - Also note that the make target becomes "make xipImage" rather than
> > - "make zImage" or "make Image". The final kernel binary to put in
> > - ROM memory will be arch/riscv/boot/xipImage.
> > -
> > - SPARSEMEM is required because the kernel text and rodata that are
> > - flash resident are not backed by memmap, then any attempt to get
> > - a struct page on those regions will trigger a fault.
> > -
> > - If unsure, say N.
> > -
> > -config XIP_PHYS_ADDR
> > - hex "XIP Kernel Physical Location"
> > - depends on XIP_KERNEL
> > - default "0x21000000"
> > - help
> > - This is the physical address in your flash memory the kernel will
> > - be linked for and stored to. This address is dependent on your
> > - own flash usage.
> > -
> > config RISCV_ISA_FALLBACK
> > bool "Permit falling back to parsing riscv,isa for extension support by default"
> > default y
> > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> > index d621b85dd63b..c174ac0ec46b 100644
> > --- a/arch/riscv/Kconfig.socs
> > +++ b/arch/riscv/Kconfig.socs
> > @@ -2,7 +2,7 @@ menu "SoC selection"
> >
> > config ARCH_ANDES
> > bool "Andes SoCs"
> > - depends on MMU && !XIP_KERNEL
> > + depends on MMU
> > select ERRATA_ANDES
> > help
> > This enables support for Andes SoC platform hardware.
> > @@ -33,7 +33,7 @@ config ARCH_RENESAS
> >
> > config ARCH_SIFIVE
> > bool "SiFive SoCs"
> > - select ERRATA_SIFIVE if !XIP_KERNEL
> > + select ERRATA_SIFIVE
> > help
> > This enables support for SiFive SoC platform hardware.
> >
> > @@ -61,7 +61,7 @@ config SOC_STARFIVE
> >
> > config ARCH_SUNXI
> > bool "Allwinner sun20i SoCs"
> > - depends on MMU && !XIP_KERNEL
> > + depends on MMU
> > select ERRATA_THEAD
> > select SUN4I_TIMER
> > help
> > @@ -78,7 +78,7 @@ config ARCH_TENSTORRENT
> >
> > config ARCH_THEAD
> > bool "T-HEAD RISC-V SoCs"
> > - depends on MMU && !XIP_KERNEL
> > + depends on MMU
> > select ERRATA_THEAD
> > select PM_GENERIC_DOMAINS if PM
> > help
> > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > index 371da75a47f9..2cda87a5aaf1 100644
> > --- a/arch/riscv/Makefile
> > +++ b/arch/riscv/Makefile
> > @@ -150,7 +150,6 @@ ifdef CONFIG_RISCV_M_MODE
> > boot-image-$(CONFIG_SOC_CANAAN_K210) := loader.bin
> > endif
> > boot-image-$(CONFIG_EFI_ZBOOT) := vmlinuz.efi
> > -boot-image-$(CONFIG_XIP_KERNEL) := xipImage
> > KBUILD_IMAGE := $(boot)/$(boot-image-y)
> >
> > libs-y += arch/riscv/lib/
> > @@ -218,8 +217,6 @@ define archhelp
> > echo ' Image.xz - Compressed kernel image (arch/riscv/boot/Image.xz)'
> > echo ' vmlinuz.efi - Compressed EFI kernel image (arch/riscv/boot/vmlinuz.efi)'
> > echo ' Default when CONFIG_EFI_ZBOOT=y'
> > - echo ' xipImage - Execute-in-place kernel image (arch/riscv/boot/xipImage)'
> > - echo ' Default when CONFIG_XIP_KERNEL=y'
> > echo ' install - Install kernel using (your) ~/bin/$(INSTALLKERNEL) or'
> > echo ' (distribution) /sbin/$(INSTALLKERNEL) or install to '
> > echo ' $$(INSTALL_PATH)'
> > diff --git a/arch/riscv/boot/Makefile b/arch/riscv/boot/Makefile
> > index 5301adf5f3f5..fcfbe3f814d6 100644
> > --- a/arch/riscv/boot/Makefile
> > +++ b/arch/riscv/boot/Makefile
> > @@ -20,17 +20,6 @@ OBJCOPYFLAGS_xipImage :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
> >
> > targets := Image Image.* loader loader.o loader.lds loader.bin xipImage
> >
> > -ifeq ($(CONFIG_XIP_KERNEL),y)
> > -
> > -quiet_cmd_mkxip = $(quiet_cmd_objcopy)
> > -cmd_mkxip = $(cmd_objcopy)
> > -
> > -$(obj)/xipImage: vmlinux FORCE
> > - $(call if_changed,mkxip)
> > - @$(kecho) ' Physical Address of xipImage: $(CONFIG_XIP_PHYS_ADDR)'
> > -
> > -endif
> > -
> > $(obj)/Image: vmlinux FORCE
> > $(call if_changed,objcopy)
> >
> > diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
> > index 3c517bc9eac5..9ccd80d57ffe 100644
> > --- a/arch/riscv/include/asm/page.h
> > +++ b/arch/riscv/include/asm/page.h
> > @@ -29,11 +29,7 @@
> > #define PAGE_OFFSET_L5 _AC(0xff60000000000000, UL)
> > #define PAGE_OFFSET_L4 _AC(0xffffaf8000000000, UL)
> > #define PAGE_OFFSET_L3 _AC(0xffffffd600000000, UL)
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define PAGE_OFFSET PAGE_OFFSET_L3
> > -#else
> > #define PAGE_OFFSET kernel_map.page_offset
> > -#endif /* CONFIG_XIP_KERNEL */
> > #else
> > #define PAGE_OFFSET _AC(0xc0000000, UL)
> > #endif /* CONFIG_64BIT */
> > @@ -105,15 +101,8 @@ struct kernel_mapping {
> > /* Offset between linear mapping virtual address and kernel load address */
> > unsigned long va_pa_offset;
> > /* Offset between kernel mapping virtual address and kernel load address */
> > -#ifdef CONFIG_XIP_KERNEL
> > - unsigned long va_kernel_xip_text_pa_offset;
> > - unsigned long va_kernel_xip_data_pa_offset;
> > - uintptr_t xiprom;
> > - uintptr_t xiprom_sz;
> > -#else
> > unsigned long page_offset;
> > unsigned long va_kernel_pa_offset;
> > -#endif
> > };
> >
> > extern struct kernel_mapping kernel_map;
> > @@ -132,16 +121,7 @@ extern unsigned long vmemmap_start_pfn;
> > void *linear_mapping_pa_to_va(unsigned long x);
> > #endif
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define kernel_mapping_pa_to_va(y) ({ \
> > - unsigned long _y = (unsigned long)(y); \
> > - (_y < phys_ram_base) ? \
> > - (void *)(_y + kernel_map.va_kernel_xip_text_pa_offset) : \
> > - (void *)(_y + kernel_map.va_kernel_xip_data_pa_offset); \
> > - })
> > -#else
> > #define kernel_mapping_pa_to_va(y) ((void *)((unsigned long)(y) + kernel_map.va_kernel_pa_offset))
> > -#endif
> >
> > #define __pa_to_va_nodebug(x) linear_mapping_pa_to_va(x)
> >
> > @@ -151,16 +131,7 @@ void *linear_mapping_pa_to_va(unsigned long x);
> > phys_addr_t linear_mapping_va_to_pa(unsigned long x);
> > #endif
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define kernel_mapping_va_to_pa(y) ({ \
> > - unsigned long _y = (unsigned long)(y); \
> > - (_y < kernel_map.virt_addr + kernel_map.xiprom_sz) ? \
> > - (_y - kernel_map.va_kernel_xip_text_pa_offset) : \
> > - (_y - kernel_map.va_kernel_xip_data_pa_offset); \
> > - })
> > -#else
> > #define kernel_mapping_va_to_pa(y) ((unsigned long)(y) - kernel_map.va_kernel_pa_offset)
> > -#endif
> >
> > #define __va_to_pa_nodebug(x) ({ \
> > unsigned long _x = x; \
> > diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
> > index 1340aa398a74..a18c0f62b452 100644
> > --- a/arch/riscv/include/asm/pgtable.h
> > +++ b/arch/riscv/include/asm/pgtable.h
> > @@ -134,21 +134,6 @@
> >
> > #include <linux/page_table_check.h>
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define XIP_FIXUP(addr) ({ \
> > - extern char _sdata[], _start[], _end[]; \
> > - uintptr_t __rom_start_data = CONFIG_XIP_PHYS_ADDR \
> > - + (uintptr_t)&_sdata - (uintptr_t)&_start; \
> > - uintptr_t __rom_end_data = CONFIG_XIP_PHYS_ADDR \
> > - + (uintptr_t)&_end - (uintptr_t)&_start; \
> > - uintptr_t __a = (uintptr_t)(addr); \
> > - (__a >= __rom_start_data && __a < __rom_end_data) ? \
> > - __a - __rom_start_data + CONFIG_PHYS_RAM_BASE : __a; \
> > - })
> > -#else
> > -#define XIP_FIXUP(addr) (addr)
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > struct pt_alloc_ops {
> > pte_t *(*get_pte_virt)(phys_addr_t pa);
> > phys_addr_t (*alloc_pte)(uintptr_t va);
> > @@ -1272,13 +1257,8 @@ static inline pte_t pte_swp_clear_exclusive(pte_t pte)
> > extern char _start[];
> > extern void *_dtb_early_va;
> > extern uintptr_t _dtb_early_pa;
> > -#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_MMU)
> > -#define dtb_early_va (*(void **)XIP_FIXUP(&_dtb_early_va))
> > -#define dtb_early_pa (*(uintptr_t *)XIP_FIXUP(&_dtb_early_pa))
> > -#else
> > #define dtb_early_va _dtb_early_va
> > #define dtb_early_pa _dtb_early_pa
> > -#endif /* CONFIG_XIP_KERNEL */
> > extern u64 satp_mode;
> >
> > void paging_init(void);
> > diff --git a/arch/riscv/include/asm/scs.h b/arch/riscv/include/asm/scs.h
> > index ab7714aa93bd..023a412fe38d 100644
> > --- a/arch/riscv/include/asm/scs.h
> > +++ b/arch/riscv/include/asm/scs.h
> > @@ -10,7 +10,6 @@
> > /* Load init_shadow_call_stack to gp. */
> > .macro scs_load_init_stack
> > la gp, init_shadow_call_stack
> > - XIP_FIXUP_OFFSET gp
> > .endm
> >
> > /* Load the per-CPU IRQ shadow call stack to gp. */
> > diff --git a/arch/riscv/include/asm/set_memory.h b/arch/riscv/include/asm/set_memory.h
> > index 87389e93325a..ef59e1716a2c 100644
> > --- a/arch/riscv/include/asm/set_memory.h
> > +++ b/arch/riscv/include/asm/set_memory.h
> > @@ -47,7 +47,7 @@ bool kernel_page_present(struct page *page);
> >
> > #endif /* __ASSEMBLER__ */
> >
> > -#if defined(CONFIG_STRICT_KERNEL_RWX) || defined(CONFIG_XIP_KERNEL)
> > +#if defined(CONFIG_STRICT_KERNEL_RWX)
> > #ifdef CONFIG_64BIT
> > #define SECTION_ALIGN (1 << 21)
> > #else
> > diff --git a/arch/riscv/include/asm/xip_fixup.h b/arch/riscv/include/asm/xip_fixup.h
> > deleted file mode 100644
> > index f3d56299bc22..000000000000
> > --- a/arch/riscv/include/asm/xip_fixup.h
> > +++ /dev/null
> > @@ -1,49 +0,0 @@
> > -/* SPDX-License-Identifier: GPL-2.0-only */
> > -/*
> > - * XIP fixup macros, only useful in assembly.
> > - */
> > -#ifndef _ASM_RISCV_XIP_FIXUP_H
> > -#define _ASM_RISCV_XIP_FIXUP_H
> > -
> > -#include <linux/pgtable.h>
> > -
> > -#ifdef CONFIG_XIP_KERNEL
> > -.macro XIP_FIXUP_OFFSET reg
> > - /* Fix-up address in Flash into address in RAM early during boot before
> > - * MMU is up. Because generated code "thinks" data is in Flash, but it
> > - * is actually in RAM (actually data is also in Flash, but Flash is
> > - * read-only, thus we need to use the data residing in RAM).
> > - *
> > - * The start of data in Flash is _sdata and the start of data in RAM is
> > - * CONFIG_PHYS_RAM_BASE. So this fix-up essentially does this:
> > - * reg += CONFIG_PHYS_RAM_BASE - _start
> > - */
> > - li t0, CONFIG_PHYS_RAM_BASE
> > - add \reg, \reg, t0
> > - la t0, _sdata
> > - sub \reg, \reg, t0
> > -.endm
> > -.macro XIP_FIXUP_FLASH_OFFSET reg
> > - /* In linker script, at the transition from read-only section to
> > - * writable section, the VMA is increased while LMA remains the same.
> > - * (See in linker script how _sdata, __data_loc and LOAD_OFFSET is
> > - * changed)
> > - *
> > - * Consequently, early during boot before MMU is up, the generated code
> > - * reads the "writable" section at wrong addresses, because VMA is used
> > - * by compiler to generate code, but the data is located in Flash using
> > - * LMA.
> > - */
> > - la t0, _sdata
> > - sub \reg, \reg, t0
> > - la t0, __data_loc
> > - add \reg, \reg, t0
> > -.endm
> > -#else
> > -.macro XIP_FIXUP_OFFSET reg
> > -.endm
> > -.macro XIP_FIXUP_FLASH_OFFSET reg
> > -.endm
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > -#endif
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index 9c99c5ad6fe8..650399044368 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -14,7 +14,6 @@
> > #include <asm/hwcap.h>
> > #include <asm/image.h>
> > #include <asm/scs.h>
> > -#include <asm/xip_fixup.h>
> > #include <asm/usercfi.h>
> > #include "efi-header.S"
> >
> > @@ -75,7 +74,6 @@ pe_head_start:
> > relocate_enable_mmu:
> > /* Relocate return address */
> > la a1, kernel_map
> > - XIP_FIXUP_OFFSET a1
> > REG_L a1, KERNEL_MAP_VIRT_ADDR(a1)
> > la a2, _start
> > sub a1, a1, a2
> > @@ -89,7 +87,6 @@ relocate_enable_mmu:
> > /* Compute satp for kernel page tables, but don't load it yet */
> > srl a2, a0, PAGE_SHIFT
> > la a1, satp_mode
> > - XIP_FIXUP_OFFSET a1
> > REG_L a1, 0(a1)
> > or a2, a2, a1
> >
> > @@ -100,7 +97,6 @@ relocate_enable_mmu:
> > * to ensure the new translations are in use.
> > */
> > la a0, trampoline_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > srl a0, a0, PAGE_SHIFT
> > or a0, a0, a1
> > sfence.vma
> > @@ -154,11 +150,9 @@ secondary_start_sbi:
> >
> > /* a0 contains the hartid & a1 contains boot data */
> > li a2, SBI_HART_BOOT_TASK_PTR_OFFSET
> > - XIP_FIXUP_OFFSET a2
> > add a2, a2, a1
> > REG_L tp, (a2)
> > li a3, SBI_HART_BOOT_STACK_PTR_OFFSET
> > - XIP_FIXUP_OFFSET a3
> > add a3, a3, a1
> > REG_L sp, (a3)
> >
> > @@ -167,7 +161,6 @@ secondary_start_sbi:
> > #ifdef CONFIG_MMU
> > /* Enable virtual memory and relocate to virtual address */
> > la a0, swapper_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > call relocate_enable_mmu
> > #endif
> > call .Lsetup_trap_vector
> > @@ -269,40 +262,13 @@ SYM_CODE_START(_start_kernel)
> > .Lgood_cores:
> >
> > /* The lottery system is only required for spinwait booting method */
> > -#ifndef CONFIG_XIP_KERNEL
> > /* Pick one hart to run the main boot sequence */
> > la a3, hart_lottery
> > li a2, 1
> > amoadd.w a3, a2, (a3)
> > bnez a3, .Lsecondary_start
> > -
> > -#else
> > - /* hart_lottery in flash contains a magic number */
> > - la a3, hart_lottery
> > - mv a2, a3
> > - XIP_FIXUP_OFFSET a2
> > - XIP_FIXUP_FLASH_OFFSET a3
> > - lw t1, (a3)
> > - amoswap.w t0, t1, (a2)
> > - /* first time here if hart_lottery in RAM is not set */
> > - beq t0, t1, .Lsecondary_start
> > -
> > -#endif /* CONFIG_XIP */
> > #endif /* CONFIG_RISCV_BOOT_SPINWAIT */
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > - la sp, _end + THREAD_SIZE
> > - XIP_FIXUP_OFFSET sp
> > - mv s0, a0
> > - mv s1, a1
> > - call __copy_data
> > -
> > - /* Restore a0 & a1 copy */
> > - mv a0, s0
> > - mv a1, s1
> > -#endif
> > -
> > -#ifndef CONFIG_XIP_KERNEL
> > /* Clear BSS for flat non-ELF images */
> > la a3, __bss_start
> > la a4, __bss_stop
> > @@ -312,20 +278,16 @@ SYM_CODE_START(_start_kernel)
> > add a3, a3, RISCV_SZPTR
> > blt a3, a4, .Lclear_bss
> > .Lclear_bss_done:
> > -#endif
> > la a2, boot_cpu_hartid
> > - XIP_FIXUP_OFFSET a2
> > REG_S a0, (a2)
> >
> > /* Initialize page tables and relocate to virtual addresses */
> > la tp, init_task
> > la sp, init_thread_union + THREAD_SIZE
> > - XIP_FIXUP_OFFSET sp
> > addi sp, sp, -PT_SIZE_ON_STACK
> > scs_load_init_stack
> > #ifdef CONFIG_BUILTIN_DTB
> > la a0, __dtb_start
> > - XIP_FIXUP_OFFSET a0
> > #else
> > mv a0, a1
> > #endif /* CONFIG_BUILTIN_DTB */
> > @@ -335,7 +297,6 @@ SYM_CODE_START(_start_kernel)
> > call setup_vm
> > #ifdef CONFIG_MMU
> > la a0, early_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > call relocate_enable_mmu
> > #endif /* CONFIG_MMU */
> >
> > @@ -374,9 +335,7 @@ SYM_CODE_START(_start_kernel)
> >
> > slli a3, a0, LGREG
> > la a1, __cpu_spinwait_stack_pointer
> > - XIP_FIXUP_OFFSET a1
> > la a2, __cpu_spinwait_task_pointer
> > - XIP_FIXUP_OFFSET a2
> > add a1, a3, a1
> > add a2, a3, a2
> >
> > diff --git a/arch/riscv/kernel/head.h b/arch/riscv/kernel/head.h
> > index a556fdaafed9..05a04bef442b 100644
> > --- a/arch/riscv/kernel/head.h
> > +++ b/arch/riscv/kernel/head.h
> > @@ -11,9 +11,6 @@
> > extern atomic_t hart_lottery;
> >
> > asmlinkage void __init setup_vm(uintptr_t dtb_pa);
> > -#ifdef CONFIG_XIP_KERNEL
> > -asmlinkage void __init __copy_data(void);
> > -#endif
> >
> > #ifdef CONFIG_RISCV_BOOT_SPINWAIT
> > extern void *__cpu_spinwait_stack_pointer[];
> > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > index b5bc5fc65cea..c89cc272440b 100644
> > --- a/arch/riscv/kernel/setup.c
> > +++ b/arch/riscv/kernel/setup.c
> > @@ -46,11 +46,7 @@
> > * This is used before the kernel initializes the BSS so it can't be in the
> > * BSS.
> > */
> > -atomic_t hart_lottery __section(".sdata")
> > -#ifdef CONFIG_XIP_KERNEL
> > -= ATOMIC_INIT(0xC001BEEF)
> > -#endif
> > -;
> > +atomic_t hart_lottery __section(".sdata");
> > unsigned long boot_cpu_hartid;
> > EXPORT_SYMBOL_GPL(boot_cpu_hartid);
> >
> > diff --git a/arch/riscv/kernel/suspend_entry.S b/arch/riscv/kernel/suspend_entry.S
> > index 2d54f309c140..d71b55fd6259 100644
> > --- a/arch/riscv/kernel/suspend_entry.S
> > +++ b/arch/riscv/kernel/suspend_entry.S
> > @@ -10,7 +10,6 @@
> > #include <asm/asm-offsets.h>
> > #include <asm/assembler.h>
> > #include <asm/csr.h>
> > -#include <asm/xip_fixup.h>
> >
> > .text
> > .altmacro
> > @@ -70,7 +69,6 @@ SYM_TYPED_FUNC_START(__cpu_resume_enter)
> >
> > /* Enable MMU */
> > la a0, swapper_pg_dir
> > - XIP_FIXUP_OFFSET a0
> > call relocate_enable_mmu
> >
> > /* Restore A0 and A1 */
> > diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> > index 5fb57fad188a..bdec54d12b2a 100644
> > --- a/arch/riscv/kernel/traps.c
> > +++ b/arch/riscv/kernel/traps.c
> > @@ -142,11 +142,7 @@ static void do_trap_error(struct pt_regs *regs, int signo, int code,
> > }
> > }
> >
> > -#if defined(CONFIG_XIP_KERNEL) && defined(CONFIG_RISCV_ALTERNATIVE)
> > -#define __trap_section __noinstr_section(".xip.traps")
> > -#else
> > #define __trap_section noinstr
> > -#endif
> > #define DO_ERROR_INFO(name, signo, code, str) \
> > asmlinkage __visible __trap_section void name(struct pt_regs *regs) \
> > { \
> > diff --git a/arch/riscv/kernel/vmcore_info.c b/arch/riscv/kernel/vmcore_info.c
> > index d5e448aa90e7..6d7a22522d63 100644
> > --- a/arch/riscv/kernel/vmcore_info.c
> > +++ b/arch/riscv/kernel/vmcore_info.c
> > @@ -19,13 +19,6 @@ void arch_crash_save_vmcoreinfo(void)
> > #endif
> > #endif
> > vmcoreinfo_append_str("NUMBER(KERNEL_LINK_ADDR)=0x%lx\n", KERNEL_LINK_ADDR);
> > -#ifdef CONFIG_XIP_KERNEL
> > - /* TODO: Communicate with crash-utility developers on the information to
> > - * export. The XIP case is more complicated, because the virtual-physical
> > - * address offset depends on whether the address is in ROM or in RAM.
> > - */
> > -#else
> > vmcoreinfo_append_str("NUMBER(va_kernel_pa_offset)=0x%lx\n",
> > kernel_map.va_kernel_pa_offset);
> > -#endif
> > }
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S b/arch/riscv/kernel/vmlinux.lds.S
> > index 61bd5ba6680a..3b5ffcf3216d 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -7,10 +7,6 @@
> > #define RO_EXCEPTION_TABLE_ALIGN 4
> > #define RUNTIME_DISCARD_EXIT
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#include "vmlinux-xip.lds.S"
> > -#else
> > -
> > #include <asm/pgtable.h>
> > #define LOAD_OFFSET KERNEL_LINK_ADDR
> >
> > @@ -175,4 +171,3 @@ SECTIONS
> >
> > DISCARDS
> > }
> > -#endif /* CONFIG_XIP_KERNEL */
> > diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
> > index 25a8f693a765..c7ec6c0235e1 100644
> > --- a/arch/riscv/mm/init.c
> > +++ b/arch/riscv/mm/init.c
> > @@ -41,20 +41,17 @@ u64 new_vmalloc[NR_CPUS / sizeof(u64) + 1];
> >
> > struct kernel_mapping kernel_map __ro_after_init;
> > EXPORT_SYMBOL(kernel_map);
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define kernel_map (*(struct kernel_mapping *)XIP_FIXUP(&kernel_map))
> > -#endif
> >
> > #ifdef CONFIG_64BIT
> > -u64 satp_mode __ro_after_init = !IS_ENABLED(CONFIG_XIP_KERNEL) ? SATP_MODE_57 : SATP_MODE_39;
> > +u64 satp_mode __ro_after_init = SATP_MODE_57;
> > #else
> > u64 satp_mode __ro_after_init = SATP_MODE_32;
> > #endif
> > EXPORT_SYMBOL(satp_mode);
> >
> > #ifdef CONFIG_64BIT
> > -bool pgtable_l4_enabled __ro_after_init = !IS_ENABLED(CONFIG_XIP_KERNEL);
> > -bool pgtable_l5_enabled __ro_after_init = !IS_ENABLED(CONFIG_XIP_KERNEL);
> > +bool pgtable_l4_enabled __ro_after_init = true;
> > +bool pgtable_l5_enabled __ro_after_init = true;
> > EXPORT_SYMBOL(pgtable_l4_enabled);
> > EXPORT_SYMBOL(pgtable_l5_enabled);
> > #endif
> > @@ -197,9 +194,6 @@ void __init arch_mm_preinit(void)
> >
> > /* Limit the memory size via mem. */
> > static phys_addr_t memory_limit;
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define memory_limit (*(phys_addr_t *)XIP_FIXUP(&memory_limit))
> > -#endif /* CONFIG_XIP_KERNEL */
> >
> > static int __init early_mem(char *p)
> > {
> > @@ -223,10 +217,7 @@ static void __init setup_bootmem(void)
> > phys_addr_t max_mapped_addr;
> > phys_addr_t phys_ram_end, vmlinux_start;
> >
> > - if (IS_ENABLED(CONFIG_XIP_KERNEL))
> > - vmlinux_start = __pa_symbol(&_sdata);
> > - else
> > - vmlinux_start = __pa_symbol(&_start);
> > + vmlinux_start = __pa_symbol(&_start);
> >
> > memblock_enforce_memory_limit(memory_limit);
> >
> > @@ -246,12 +237,10 @@ static void __init setup_bootmem(void)
> > * Make sure we align the start of the memory on a PMD boundary so that
> > * at worst, we map the linear mapping with PMD mappings.
> > */
> > - if (!IS_ENABLED(CONFIG_XIP_KERNEL)) {
> > - phys_ram_base = memblock_start_of_DRAM() & PMD_MASK;
> > + phys_ram_base = memblock_start_of_DRAM() & PMD_MASK;
> > #ifdef CONFIG_SPARSEMEM_VMEMMAP
> > - vmemmap_start_pfn = round_down(phys_ram_base, VMEMMAP_ADDR_ALIGN) >> PAGE_SHIFT;
> > + vmemmap_start_pfn = round_down(phys_ram_base, VMEMMAP_ADDR_ALIGN) >> PAGE_SHIFT;
> > #endif
> > - }
> >
> > /*
> > * In 64-bit, any use of __va/__pa before this point is wrong as we
> > @@ -366,13 +355,6 @@ static pte_t fixmap_pte[PTRS_PER_PTE] __page_aligned_bss;
> >
> > pgd_t early_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define pt_ops (*(struct pt_alloc_ops *)XIP_FIXUP(&pt_ops))
> > -#define trampoline_pg_dir ((pgd_t *)XIP_FIXUP(trampoline_pg_dir))
> > -#define fixmap_pte ((pte_t *)XIP_FIXUP(fixmap_pte))
> > -#define early_pg_dir ((pgd_t *)XIP_FIXUP(early_pg_dir))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > static const pgprot_t protection_map[16] = {
> > [VM_NONE] = PAGE_NONE,
> > [VM_READ] = PAGE_READ,
> > @@ -469,32 +451,14 @@ static pmd_t trampoline_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > static pmd_t fixmap_pmd[PTRS_PER_PMD] __page_aligned_bss;
> > static pmd_t early_pmd[PTRS_PER_PMD] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define trampoline_pmd ((pmd_t *)XIP_FIXUP(trampoline_pmd))
> > -#define fixmap_pmd ((pmd_t *)XIP_FIXUP(fixmap_pmd))
> > -#define early_pmd ((pmd_t *)XIP_FIXUP(early_pmd))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > static p4d_t trampoline_p4d[PTRS_PER_P4D] __page_aligned_bss;
> > static p4d_t fixmap_p4d[PTRS_PER_P4D] __page_aligned_bss;
> > static p4d_t early_p4d[PTRS_PER_P4D] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define trampoline_p4d ((p4d_t *)XIP_FIXUP(trampoline_p4d))
> > -#define fixmap_p4d ((p4d_t *)XIP_FIXUP(fixmap_p4d))
> > -#define early_p4d ((p4d_t *)XIP_FIXUP(early_p4d))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > static pud_t trampoline_pud[PTRS_PER_PUD] __page_aligned_bss;
> > static pud_t fixmap_pud[PTRS_PER_PUD] __page_aligned_bss;
> > static pud_t early_pud[PTRS_PER_PUD] __initdata __aligned(PAGE_SIZE);
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define trampoline_pud ((pud_t *)XIP_FIXUP(trampoline_pud))
> > -#define fixmap_pud ((pud_t *)XIP_FIXUP(fixmap_pud))
> > -#define early_pud ((pud_t *)XIP_FIXUP(early_pud))
> > -#endif /* CONFIG_XIP_KERNEL */
> > -
> > static pmd_t *__init get_pmd_virt_early(phys_addr_t pa)
> > {
> > /* Before MMU is enabled */
> > @@ -765,21 +729,6 @@ static uintptr_t __meminit best_map_size(phys_addr_t pa, uintptr_t va, phys_addr
> > return PAGE_SIZE;
> > }
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -#define phys_ram_base (*(phys_addr_t *)XIP_FIXUP(&phys_ram_base))
> > -extern char _xiprom[], _exiprom[], __data_loc;
> > -
> > -/* called from head.S with MMU off */
> > -asmlinkage void __init __copy_data(void)
> > -{
> > - void *from = (void *)(&__data_loc);
> > - void *to = (void *)CONFIG_PHYS_RAM_BASE;
> > - size_t sz = (size_t)((uintptr_t)(&_end) - (uintptr_t)(&_sdata));
> > -
> > - memcpy(to, from, sz);
> > -}
> > -#endif
> > -
> > #ifdef CONFIG_STRICT_KERNEL_RWX
> > static __meminit pgprot_t pgprot_from_va(uintptr_t va)
> > {
> > @@ -815,7 +764,7 @@ static __meminit pgprot_t pgprot_from_va(uintptr_t va)
> > }
> > #endif /* CONFIG_STRICT_KERNEL_RWX */
> >
> > -#if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
> > +#if defined(CONFIG_64BIT)
> > u64 __pi_set_satp_mode_from_cmdline(uintptr_t dtb_pa);
> > u64 __pi_set_satp_mode_from_fdt(uintptr_t dtb_pa);
> >
> > @@ -940,28 +889,6 @@ static __init void set_satp_mode(uintptr_t dtb_pa)
> > #error "setup_vm() is called from head.S before relocate so it should not use absolute addressing."
> > #endif
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > -static void __init create_kernel_page_table(pgd_t *pgdir,
> > - __always_unused bool early)
> > -{
> > - uintptr_t va, start_va, end_va;
> > -
> > - /* Map the flash resident part */
> > - end_va = kernel_map.virt_addr + kernel_map.xiprom_sz;
> > - for (va = kernel_map.virt_addr; va < end_va; va += PMD_SIZE)
> > - create_pgd_mapping(pgdir, va,
> > - kernel_map.xiprom + (va - kernel_map.virt_addr),
> > - PMD_SIZE, PAGE_KERNEL_EXEC);
> > -
> > - /* Map the data in RAM */
> > - start_va = kernel_map.virt_addr + (uintptr_t)&_sdata - (uintptr_t)&_start;
> > - end_va = kernel_map.virt_addr + kernel_map.size;
> > - for (va = start_va; va < end_va; va += PMD_SIZE)
> > - create_pgd_mapping(pgdir, va,
> > - kernel_map.phys_addr + (va - start_va),
> > - PMD_SIZE, PAGE_KERNEL);
> > -}
> > -#else
> > static void __init create_kernel_page_table(pgd_t *pgdir, bool early)
> > {
> > uintptr_t va, end_va;
> > @@ -974,7 +901,6 @@ static void __init create_kernel_page_table(pgd_t *pgdir, bool early)
> > early ?
> > PAGE_KERNEL_EXEC : pgprot_from_va(va));
> > }
> > -#endif
> >
> > /*
> > * Setup a 4MB mapping that encompasses the device tree: for 64-bit kernel,
> > @@ -1116,27 +1042,11 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> >
> > kernel_map.virt_addr = KERNEL_LINK_ADDR + kernel_map.virt_offset;
> >
> > -#ifdef CONFIG_XIP_KERNEL
> > - kernel_map.xiprom = (uintptr_t)CONFIG_XIP_PHYS_ADDR;
> > - kernel_map.xiprom_sz = (uintptr_t)(&_exiprom) - (uintptr_t)(&_xiprom);
> > -
> > - phys_ram_base = CONFIG_PHYS_RAM_BASE;
> > -#ifdef CONFIG_SPARSEMEM_VMEMMAP
> > - vmemmap_start_pfn = round_down(phys_ram_base, VMEMMAP_ADDR_ALIGN) >> PAGE_SHIFT;
> > -#endif
> > - kernel_map.phys_addr = (uintptr_t)CONFIG_PHYS_RAM_BASE;
> > - kernel_map.size = (uintptr_t)(&_end) - (uintptr_t)(&_start);
> > -
> > - kernel_map.va_kernel_xip_text_pa_offset = kernel_map.virt_addr - kernel_map.xiprom;
> > - kernel_map.va_kernel_xip_data_pa_offset = kernel_map.virt_addr - kernel_map.phys_addr
> > - + (uintptr_t)&_sdata - (uintptr_t)&_start;
> > -#else
> > kernel_map.phys_addr = (uintptr_t)(&_start);
> > kernel_map.size = (uintptr_t)(&_end) - kernel_map.phys_addr;
> > kernel_map.va_kernel_pa_offset = kernel_map.virt_addr - kernel_map.phys_addr;
> > -#endif
> >
> > -#if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
> > +#if defined(CONFIG_64BIT)
> > set_satp_mode(dtb_pa);
> > set_mmap_rnd_bits_max();
> > #endif
> > @@ -1209,13 +1119,8 @@ asmlinkage void __init setup_vm(uintptr_t dtb_pa)
> > if (pgtable_l4_enabled)
> > create_pud_mapping(trampoline_pud, kernel_map.virt_addr,
> > (uintptr_t)trampoline_pmd, PUD_SIZE, PAGE_TABLE);
> > -#ifdef CONFIG_XIP_KERNEL
> > - create_pmd_mapping(trampoline_pmd, kernel_map.virt_addr,
> > - kernel_map.xiprom, PMD_SIZE, PAGE_KERNEL_EXEC);
> > -#else
> > create_pmd_mapping(trampoline_pmd, kernel_map.virt_addr,
> > kernel_map.phys_addr, PMD_SIZE, PAGE_KERNEL_EXEC);
> > -#endif
> > #else
> > /* Setup trampoline PGD */
> > create_pgd_mapping(trampoline_pg_dir, kernel_map.virt_addr,
>
> --
> Thanx, Kunwu
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-riscv