[PATCH v5 33/38] gpu: nova-core: refactor SEC2 booter loading into BooterFirmware::run()

[John Hubbard]

Move the SEC2 reset/load/boot sequence into a BooterFirmware::run()
method, and call it from a thin run_booter() helper on Gsp. This is
almost a pure refactoring with no behavior change, done in preparation
for adding an alternative FSP boot path. The one slight difference is
that an MBOX1 printing typo is fixed:

Previous output:

NovaCore 0000:e1:00.0: SEC2 MBOX0: 0x0, MBOX10x1

Fixed output:

NovaCore 0000:e1:00.0: SEC2 MBOX0: 0x0, MBOX1: 0x1

Cc: Timur Tabi <ttabi@xxxxxxxxxx>
Suggested-by: Danilo Krummrich <dakr@xxxxxxxxxx>
Co-developed-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
Signed-off-by: Alexandre Courbot <acourbot@xxxxxxxxxx>
Signed-off-by: John Hubbard <jhubbard@xxxxxxxxxx>
---
 drivers/gpu/nova-core/firmware/booter.rs | 35 +++++++++++++++-
 drivers/gpu/nova-core/gsp/boot.rs        | 52 +++++++++---------------
 2 files changed, 54 insertions(+), 33 deletions(-)

diff --git a/drivers/gpu/nova-core/firmware/booter.rs b/drivers/gpu/nova-core/firmware/booter.rs
index 86556cee8e67..b3ac3b826e9f 100644
--- a/drivers/gpu/nova-core/firmware/booter.rs
+++ b/drivers/gpu/nova-core/firmware/booter.rs
@@ -11,8 +11,12 @@
 
 use kernel::{
     device,
+    dma::CoherentAllocation,
     prelude::*,
-    transmute::FromBytes, //
+    transmute::{
+        AsBytes,
+        FromBytes, //
+    },
 };
 
 use crate::{
@@ -389,6 +393,35 @@ pub(crate) fn new(
             ucode: ucode_signed,
         })
     }
+
+    /// Load and run the booter firmware on SEC2.
+    ///
+    /// Resets SEC2, loads this firmware image, then boots with the WPR metadata
+    /// address passed via the SEC2 mailboxes.
+    pub(crate) fn run<T: AsBytes + FromBytes>(
+        &self,
+        dev: &device::Device<device::Bound>,
+        bar: &Bar0,
+        sec2_falcon: &Falcon<Sec2>,
+        wpr_meta: &CoherentAllocation<T>,
+    ) -> Result {
+        sec2_falcon.reset(bar)?;
+        sec2_falcon.load(bar, self)?;
+        let wpr_handle = wpr_meta.dma_handle();
+        let (mbox0, mbox1) = sec2_falcon.boot(
+            bar,
+            Some(wpr_handle as u32),
+            Some((wpr_handle >> 32) as u32),
+        )?;
+        dev_dbg!(dev, "SEC2 MBOX0: {:#x}, MBOX1: {:#x}\n", mbox0, mbox1);
+
+        if mbox0 != 0 {
+            dev_err!(dev, "Booter-load failed with error {:#x}\n", mbox0);
+            return Err(ENODEV);
+        }
+
+        Ok(())
+    }
 }
 
 impl FalconLoadParams for BooterFirmware {
diff --git a/drivers/gpu/nova-core/gsp/boot.rs b/drivers/gpu/nova-core/gsp/boot.rs
index 465c18e4c888..7b177756d16d 100644
--- a/drivers/gpu/nova-core/gsp/boot.rs
+++ b/drivers/gpu/nova-core/gsp/boot.rs
@@ -120,6 +120,25 @@ fn run_fwsec_frts(
         }
     }
 
+    fn run_booter(
+        dev: &device::Device<device::Bound>,
+        bar: &Bar0,
+        chipset: Chipset,
+        sec2_falcon: &Falcon<Sec2>,
+        wpr_meta: &CoherentAllocation<GspFwWprMeta>,
+    ) -> Result {
+        let booter = BooterFirmware::new(
+            dev,
+            BooterKind::Loader,
+            chipset,
+            FIRMWARE_VERSION,
+            sec2_falcon,
+            bar,
+        )?;
+
+        booter.run(dev, bar, sec2_falcon, wpr_meta)
+    }
+
     /// Attempt to boot the GSP.
     ///
     /// This is a GPU-dependent and complex procedure that involves loading firmware files from
@@ -146,15 +165,6 @@ pub(crate) fn boot(
 
         Self::run_fwsec_frts(dev, gsp_falcon, bar, &bios, &fb_layout)?;
 
-        let booter_loader = BooterFirmware::new(
-            dev,
-            BooterKind::Loader,
-            chipset,
-            FIRMWARE_VERSION,
-            sec2_falcon,
-            bar,
-        )?;
-
         let wpr_meta =
             CoherentAllocation::<GspFwWprMeta>::alloc_coherent(dev, 1, GFP_KERNEL | __GFP_ZERO)?;
         dma_write!(wpr_meta[0] = GspFwWprMeta::new(&gsp_fw, &fb_layout))?;
@@ -182,29 +192,7 @@ pub(crate) fn boot(
             "Using SEC2 to load and run the booter_load firmware...\n"
         );
 
-        sec2_falcon.reset(bar)?;
-        sec2_falcon.load(bar, &booter_loader)?;
-        let wpr_handle = wpr_meta.dma_handle();
-        let (mbox0, mbox1) = sec2_falcon.boot(
-            bar,
-            Some(wpr_handle as u32),
-            Some((wpr_handle >> 32) as u32),
-        )?;
-        dev_dbg!(
-            pdev,
-            "SEC2 MBOX0: {:#x}, MBOX1{:#x}\n",
-            mbox0,
-            mbox1
-        );
-
-        if mbox0 != 0 {
-            dev_err!(
-                pdev,
-                "Booter-load failed with error {:#x}\n",
-                mbox0
-            );
-            return Err(ENODEV);
-        }
+        Self::run_booter(dev, bar, chipset, sec2_falcon, &wpr_meta)?;
 
         gsp_falcon.write_os_version(bar, gsp_fw.bootloader.app_version);
 
-- 
2.53.0