[PATCH 2/2] arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V

[Sebastian Krzyszkowiak]

The minimal voltage of VDD_SOC sourced from BUCK1 is 0.81V, which
is the currently set value. However, BD71837 only guarantees accuracy
of ±0.01V, and this still doesn't factor other reasons for actual
voltage to slightly drop in, resulting in the possibility of running
out of the operational range.

Bump the voltage up to 0.85V, which should give enough headroom.

Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
index 7818d84f25a7..f5d529c5baf3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
@@ -882,7 +882,7 @@ buck1_reg: BUCK1 {
 				regulator-ramp-delay = <1250>;
 				rohm,dvs-run-voltage = <900000>;
 				rohm,dvs-idle-voltage = <850000>;
-				rohm,dvs-suspend-voltage = <810000>;
+				rohm,dvs-suspend-voltage = <850000>;
 				regulator-always-on;
 			};
 

-- 
2.53.0