[PATCH v2 0/1] Introduce Monaco EVK Interface Plus Mezzanine

[Umang Chheda]

Introduce device tree support for the Interface Plus [IFP] Mezzanine expansion
card used with the Qualcomm Monaco Evaluation Kit (EVK).

The Monaco IFP Mezzanine is an additional add-on card which can be stacked
on top of monaco-evk board to extend peripheral capabilities of
monaco-evk used for industrial applications.

It connects via expansion headers on the monaco-evk and provides
following peripherals :
- 4x Type A USB ports in host mode.
- TC9563 PCIe switch, which has following three downstream ports (DSP) :
   - 1st DSP connects M.2 E-key connector for connecting WLAN endpoints.
   - 2nd DSP connect M.2 B-key connector for connecting cellular modems.
   - 3rd DSP with support for Dual Ethernet ports.
- EEPROM.
- LVDS Display.
- 2*mini DP.

---
Changelog

v2:
- Change the DT filename to "monaco-evk-ifp-mezzanine.dtso", also
  update commit text and cover letter text to reflect this change - Konrad.
- Remove "status=okay" property from i2c15 node - Bjorn.
- Remove "power-source", "input-disable" and "output-enable" properties
  from tc9563_resx_n node and add "output-high" property instead to
  align with TLMM supported bindings - Bjorn.
- Remove extra '\n' from tc9563_resx_n node - Konrad.
- v1-link: [1]

[1] https://lore.kernel.org/lkml/20260210103821.4169-1-umang.chheda@xxxxxxxxxxxxxxxx/

---

Umang Chheda (1):
  arm64: dts: qcom: monaco-evk: Add Mezzanine

 arch/arm64/boot/dts/qcom/Makefile             |   4 +
 .../dts/qcom/monaco-evk-ifp-mezzanine.dtso    | 184 ++++++++++++++++++
 2 files changed, 188 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/monaco-evk-ifp-mezzanine.dtso

--
2.34.1