Re: [PATCH] arm64: dts: qcom: Enable lvds panel-DV215FHM-R01 for monaco-evk Mezzanine

[Dmitry Baryshkov]

On Fri, Feb 20, 2026 at 12:05:26PM +0530, Gopi Botlagunta wrote:
> LT9211c bridge and lvds panel node.
> LT9211c is powered by default with reset gpio connected to 66.
> 
> Signed-off-by: Gopi Botlagunta <venkata.botlagunta@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso | 117 +++++++++++++++++++++
>  1 file changed, 117 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso b/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
> index 701494d4dd7f..2512bdfbadbf 100644
> --- a/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
> +++ b/arch/arm64/boot/dts/qcom/monaco-evk-mezzanine.dtso
> @@ -11,6 +11,58 @@
>  &{/} {
>  	model = "Qualcomm Technologies, Inc. Monaco-EVK Mezzanine";
>  
> +	panel_lvds: panel-lvds@0 {
> +		compatible = "panel-lvds";

You still don't match the LVDS panel bindings. Also, this patch is being
sent for the third time, but you didn't version it. Please stop. Either
actually read the guildelines and follow them or find somebody else who
can send patches for you.

> +		data-mapping = "vesa-24";
> +		width-mm = <476>;
> +		height-mm = <268>;
> +
> +		status = "okay";
> +

Yes, all the feedback was ignored.

-- 
With best wishes
Dmitry