Re: [PATCH v3 2/2] arm64: dts: qcom: sm8550: add cpu OPP table with DDR, LLCC & L3 bandwidths

[Dmitry Baryshkov]

On Thu, Feb 19, 2026 at 10:07:40PM -0600, Aaron Kling via B4 Relay wrote:
> From: Aaron Kling <webgeek1234@xxxxxxxxx>
> 
> Add the OPP tables for each CPU clusters (cpu0-1-2, cpu3-4-5-6 & cpu7)
> to permit scaling the Last Level Cache Controller (LLCC), DDR and L3 cache
> frequency by aggregating bandwidth requests of all CPU core with referenc
> to the current OPP they are configured in by the LMH/EPSS hardware.
> 
> The effect is a proper caches & DDR frequency scaling when CPU cores
> changes frequency.
> 
> The OPP tables were built using the downstream memlat ddr, llcc & l3
> tables for each cluster types with the actual EPSS cpufreq LUT tables
> from running a QCS8550 device.
> 
> Also add the OSC L3 Cache controller node.
> 
> Also add the interconnect entry for each cpu, with 3 different paths:
> - CPU to Last Level Cache Controller (LLCC)
> - Last Level Cache Controller (LLCC) to DDR
> - L3 Cache from CPU to DDR interface
> 
> Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> # on SM8550-HDK
> Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
> Signed-off-by: Aaron Kling <webgeek1234@xxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm8550.dtsi | 367 +++++++++++++++++++++++++++++++++++
>  1 file changed, 367 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry