[PATCH 0/3] Add ITE IT6162 MIPI DSI to HDMI bridge driver

[Hermes Wu via B4 Relay]

This patch series adds support for the ITE IT6162 MIPI DSI to HDMI
bridge chip. The IT6162 is an I2C-controlled bridge that receives MIPI
DSI input and outputs HDMI signals.

The device supports the following configurations:
  - Single MIPI DSI input: up to 4K @ 30Hz
  - Dual MIPI DSI input (combined): up to 4K @ 60Hz

This series introduces:
  - dt-bindings: Add YAML binding document for ITE IT6162
  - drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver
  - MAINTAINERS: Add entry for ITE IT6162 bridge driver

Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
---
Hermes Wu (3):
      drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver
      dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge
      MAINTAINERS: Add entry for ITE IT6162 MIPI DSI to HDMI bridge driver

 .../bindings/display/bridge/ite,it6162.yaml        |  156 ++
 MAINTAINERS                                        |    8 +
 drivers/gpu/drm/bridge/Kconfig                     |   17 +
 drivers/gpu/drm/bridge/Makefile                    |    1 +
 drivers/gpu/drm/bridge/ite-it6162.c                | 1876 ++++++++++++++++++++
 5 files changed, 2058 insertions(+)
---
base-commit: 38feb171b3f92d77e8061fafb5ddfffc2c13b672
change-id: 20260223-upstream-6162-3751e78dfcad

Best regards,
-- 
Hermes Wu <Hermes.wu@xxxxxxxxxx>