[PATCH v2 3/3] PCI: qcom: Program T_POWER_ON

[Krishna Chaitanya Chundru]

Some platforms have incorrect T_POWER_ON value programmed in hardware.
Generally these will be corrected by bootloaders, but not all targets
support bootloaders to program correct values due to that
LTR_L1.2_THRESHOLD value calculated by aspm driver can be wrong, which
can result in improper L1.2 exit behavior and can trigger AER's.

Parse "t-power-on-us" property from each root port node and program them
as part of host initialization using dw_pcie_program_t_power_on() before
link training.

This property in added to the dtschema here[1].

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Link[1]: https://lore.kernel.org/all/20260205093346.667898-1-krishna.chundru@xxxxxxxxxxxxxxxx/
---
 drivers/pci/controller/dwc/pcie-qcom.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 67a16af69ddc75fca1b123e70715e692a91a9135..489ed64c1df0fa3ed9f6b0d4c3e0bb65cfc3308e 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -269,6 +269,7 @@ struct qcom_pcie_perst {
 struct qcom_pcie_port {
 	struct list_head list;
 	struct phy *phy;
+	u32 t_power_on;
 	struct list_head perst;
 };
 
@@ -1283,6 +1284,16 @@ static int qcom_pcie_phy_power_on(struct qcom_pcie *pcie)
 	return 0;
 }
 
+static int qcom_pcie_configure_ports(struct qcom_pcie *pcie)
+{
+	struct qcom_pcie_port *port;
+
+	list_for_each_entry(port, &pcie->ports, list)
+		dw_pcie_program_t_power_on(pcie->pci, port->t_power_on);
+
+	return 0;
+}
+
 static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
@@ -1317,6 +1328,8 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 	dw_pcie_remove_capability(pcie->pci, PCI_CAP_ID_MSIX);
 	dw_pcie_remove_ext_capability(pcie->pci, PCI_EXT_CAP_ID_DPC);
 
+	qcom_pcie_configure_ports(pcie);
+
 	qcom_pcie_perst_deassert(pcie);
 
 	if (pcie->cfg->ops->config_sid) {
@@ -1759,6 +1772,8 @@ static int qcom_pcie_parse_port(struct qcom_pcie *pcie, struct device_node *node
 	if (ret)
 		return ret;
 
+	of_property_read_u32(node, "t-power-on-us", &port->t_power_on);
+
 	port->phy = phy;
 	INIT_LIST_HEAD(&port->list);
 	list_add_tail(&port->list, &pcie->ports);

-- 
2.34.1