Re: [PATCH 0/3] Add ITE IT6162 MIPI DSI to HDMI bridge driver

[Dmitry Baryshkov]

On Mon, Feb 23, 2026 at 05:20:44PM +0800, Hermes Wu via B4 Relay wrote:
> This patch series adds support for the ITE IT6162 MIPI DSI to HDMI
> bridge chip. The IT6162 is an I2C-controlled bridge that receives MIPI
> DSI input and outputs HDMI signals.
> 
> The device supports the following configurations:
>   - Single MIPI DSI input: up to 4K @ 30Hz
>   - Dual MIPI DSI input (combined): up to 4K @ 60Hz
> 
> This series introduces:
>   - dt-bindings: Add YAML binding document for ITE IT6162
>   - drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver
>   - MAINTAINERS: Add entry for ITE IT6162 bridge driver
> 
> Signed-off-by: Hermes Wu <Hermes.wu@xxxxxxxxxx>
> ---
> Hermes Wu (3):
>       drm/bridge: Add ITE IT6162 MIPI DSI to HDMI bridge driver
>       dt-bindings: display: bridge: Add ITE IT6162 MIPI DSI to HDMI bridge
>       MAINTAINERS: Add entry for ITE IT6162 MIPI DSI to HDMI bridge driver

Please change the order: the bindings should come as a first patch. Also
please squash MAINTAINERS entry into the driver patch.

> 
>  .../bindings/display/bridge/ite,it6162.yaml        |  156 ++
>  MAINTAINERS                                        |    8 +
>  drivers/gpu/drm/bridge/Kconfig                     |   17 +
>  drivers/gpu/drm/bridge/Makefile                    |    1 +
>  drivers/gpu/drm/bridge/ite-it6162.c                | 1876 ++++++++++++++++++++
>  5 files changed, 2058 insertions(+)
> ---
> base-commit: 38feb171b3f92d77e8061fafb5ddfffc2c13b672
> change-id: 20260223-upstream-6162-3751e78dfcad
> 
> Best regards,
> -- 
> Hermes Wu <Hermes.wu@xxxxxxxxxx>
> 
> 

-- 
With best wishes
Dmitry