Re: [PATCH v2 RESEND 1/1] PCI: pcie_bus_config can be set at build time

[Jim Quinlan]

On Fri, Feb 20, 2026 at 5:11 PM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> [+cc Hans, Niklas]
>
> On Mon, Sep 28, 2020 at 03:46:51PM -0400, Jim Quinlan wrote:
> > The Kconfig is modified so that the pcie_bus_config setting can be done at
> > build time in the same manner as the CONFIG_PCIEASPM_XXXX choice.  The
> > pci_bus_config setting may still be overridden by the bootline param.
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
>
> We merged this as b0e85c3c8554 ("PCI: Add Kconfig options for MPS/MRRS
> strategy"), which appeared in v5.10.
>
> In retrospect, I think this might have been a mistake because it
> forces a build-time configuration for something that may not be known
> at build time and can be set via command-line parameter.

Hi Bjorn,

I don't see much difference between setting the default at build time
versus setting it via the boot command line --  both methods are
performed before runtime and make assumptions.

>
> But I can't find any discussion about it.  Did you have a use case
> where command line parameters weren't usable?

Yes.  We have a Cable Modem (CM) customer who can update their Linux
version but cannot update their boot loader or its default bootline.
FWIW, they only want the option to set pcie_bus_config to
PCIE_BUS_SAFE via the .config.

>
> If there's a platform that requires one of these settings, maybe
> there's a way to do that programmatically in the host bridge driver
> rather than using a Kconfig symbol.

It's a CM product which uses a particular Wifi chip.  Recognizing this
scenario would have the RC trying to grab the EP's vendor-id (and
possibly more info) , and that seems awkward at best.

Regards,
Jim Quinlan
Broadcom STB/CM

>
> > ---
> >  drivers/pci/Kconfig | 56 +++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/pci/pci.c   | 12 ++++++++++
> >  2 files changed, 68 insertions(+)
> >
> > diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
> > index 4bef5c2bae9f..15ce948858fb 100644
> > --- a/drivers/pci/Kconfig
> > +++ b/drivers/pci/Kconfig
> > @@ -187,6 +187,62 @@ config PCI_HYPERV
> >         The PCI device frontend driver allows the kernel to import arbitrary
> >         PCI devices from a PCI backend to support PCI driver domains.
> >
> > +choice
> > +     prompt "PCIE default bus config setting"
> > +     default PCIE_BUS_DEFAULT
> > +     depends on PCI
> > +     help
> > +       One of the following choices will set the pci_bus_config at
> > +       compile time.  The choices offered are the same as those offered
> > +       for the bootline parameter 'pci'; i.e. 'pci=pcie_bus_tune_off',
> > +       'pci=pcie_bus_safe', 'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'.
> > +       This is a compile-time setting and is still be overridden by the
> > +       above bootline parameters, if present.  If unsure, chose PCIE_BUS_DEFAULT.
> > +
> > +config PCIE_BUS_TUNE_OFF
> > +     bool "Tune Off"
> > +     depends on PCI
> > +     help
> > +       Use the BIOS defaults; doesn't touch MPS at all.  This is the same
> > +       as booting with 'pci=pcie_bus_tune_off'.
> > +
> > +config PCIE_BUS_DEFAULT
> > +     bool "Default"
> > +     depends on PCI
> > +     help
> > +       Default choice; ensures that the MPS matches upstream bridge.
> > +
> > +config PCIE_BUS_SAFE
> > +     bool "Safe"
> > +     depends on PCI
> > +     help
> > +       Use largest MPS that boot-time devices support.  If you have a
> > +       closed system with no possibility of adding new devices,
> > +       this will use the largest MPS that's supported by all devices.
> > +       This is the same as booting with 'pci=pcie_bus_safe'.
> > +
> > +config PCIE_BUS_PERFORMANCE
> > +     bool "Performance"
> > +     depends on PCI
> > +     help
> > +       Use MPS and MRRS for best performance.  This setting ensures
> > +       that a given device's MPS is no larger than its parent MPS,
> > +       which allows us to keep all switches/bridges to the max MPS supported
> > +       by their parent and eventually the PHB.  This is the same as
> > +       booting with 'pci=pcie_bus_perf'.
> > +
> > +config PCIE_BUS_PEER2PEER
> > +     bool "Peer2peer"
> > +     depends on PCI
> > +     help
> > +       Set MPS = 128 for all devices.  MPS configuration effected by
> > +       the other options could cause the MPS on one root port to be
> > +       different than that of the MPS on another.  Simply making the system
> > +       wide MPS be set to the smallest possible value (128B) solves
> > +       this issue.  This is the same as booting with 'pci=pcie_bus_peer2peer'.
> > +
> > +endchoice
> > +
> >  source "drivers/pci/hotplug/Kconfig"
> >  source "drivers/pci/controller/Kconfig"
> >  source "drivers/pci/endpoint/Kconfig"
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index e39c5499770f..dfb52ed4a931 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -101,7 +101,19 @@ unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE;
> >  #define DEFAULT_HOTPLUG_BUS_SIZE     1
> >  unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
> >
> > +
> > +/* PCIE bus config, can be overridden by bootline param */
> > +#ifdef CONFIG_PCIE_BUS_TUNE_OFF
> > +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
> > +#elif defined CONFIG_PCIE_BUS_SAFE
> > +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE;
> > +#elif defined CONFIG_PCIE_BUS_PERFORMANCE
> > +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PERFORMANCE;
> > +#elif defined CONFIG_PCIE_BUS_PEER2PEER
> > +enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_PEER2PEER;
> > +#else
> >  enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_DEFAULT;
> > +#endif
> >
> >  /*
> >   * The default CLS is used if arch didn't set CLS explicitly and not
> > --
> > 2.17.1
> >
>
>

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature