[PATCH 3/6] arm64: dts: broadcom: bcm2712: add camera backend node pispbe
From: Gregor Herburger
Date: Thu Feb 26 2026 - 04:01:27 EST
The bcm2712 found in the Raspberry Pi 5 has a PiSP Image Signal
Processor back end image processor.
Add the relevant node to the devicetree.
Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxx>
---
arch/arm64/boot/dts/broadcom/bcm2712.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 69bd2934b93b34fef27989f9ddcd8a860979ab5f..98cb2173137ecda89d7f7ca1456598ff27231196 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -648,6 +648,13 @@ mip1: msi-controller@1000131000 {
brcm,msi-offset = <8>;
};
+ isp: isp@1000880000 {
+ compatible = "brcm,bcm2712-pispbe", "raspberrypi,pispbe";
+ reg = <0x10 0x00880000 0x0 0x4000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&firmware_clocks 7>;
+ };
+
v3d: gpu@1002000000 {
compatible = "brcm,2712-v3d";
reg = <0x10 0x02000000 0x00 0x4000>,
--
2.47.3