[PATCH v2 1/2] dt-bindings: fsl: imx7ulp-smc1: Add #clock-cells property

[Peng Fan (OSS)]

From: Peng Fan <peng.fan@xxxxxxx>

The SMC1 block on i.MX7ULP is already used as a clock provider in
imx7ulp.dtsi, but the corresponding dt-binding schema does not define
the required '#clock-cells' property. This results in CHECK_DTBS schema
validation errors.

Functionally, SMC1 controls the CPU run mode configuration:
  - 00b: Normal Run (RUN)
  - 10b: Very-Low-Power Run (VLPR)
  - 11b: High-Speed Run (HSRUN)

These run modes determine the effective CPU operating point, and their
programming is tied to the OPP table.

Add the missing `#clock-cells` definition so the dt-binding schema is
consistent with the DTS and validates correctly.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
index 9d377e193c123c7de0ec4db4d4a649ed966b2d9a..7ad470260c0d08bd1e7146ef49e5f60dd6c6d4d7 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-pm.yaml
@@ -28,6 +28,9 @@ properties:
   reg:
     maxItems: 1
 
+  '#clock-cells':
+    const: 1
+
   clocks:
     maxItems: 2
 
@@ -39,6 +42,7 @@ properties:
 required:
   - compatible
   - reg
+  - '#clock-cells'
 
 additionalProperties: false
 
@@ -47,4 +51,5 @@ examples:
     smc1@40410000 {
         compatible = "fsl,imx7ulp-smc1";
         reg = <0x40410000 0x1000>;
+        #clock-cells = <1>;
     };

-- 
2.37.1