[PATCH V1 0/2] arm64: dts: qcom: lemans-evk: Update SDHC storage support via overlays

[Monish Chunara]

This series updates the device tree configuration for the LeMans EVK
board to support dynamic selection between SD card and eMMC storage.

The LeMans EVK hardware supports either an SD card or eMMC, but the
interfaces are mutually exclusive as they share the same controller and
resources. Previously, SD card support was hardcoded in the main device
tree, preventing easy switching to eMMC.

This series refactors the SDHC configuration by:

1. Moving the existing SD card configuration into a dedicated overlay.
2. Adding a new overlay to support eMMC.
3. Updating the common SDHC node in the SoC dtsi to include necessary
resources (clocks, register ranges) required by the eMMC configuration.

This allows the bootloader to apply the appropriate overlay based on the
desired storage medium.

Monish Chunara (2):
  arm64: dts: qcom: lemans-evk: Move SD card support to overlay
  arm64: dts: qcom: lemans-evk: Add SDHCI support for eMMC via overlay

 arch/arm64/boot/dts/qcom/Makefile             |  6 ++
 arch/arm64/boot/dts/qcom/lemans-evk-emmc.dtso | 64 +++++++++++++++++++
 .../boot/dts/qcom/lemans-evk-sd-card.dtso     | 25 ++++++++
 arch/arm64/boot/dts/qcom/lemans-evk.dts       | 16 -----
 arch/arm64/boot/dts/qcom/lemans.dtsi          | 10 ++-
 5 files changed, 102 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/lemans-evk-emmc.dtso
 create mode 100644 arch/arm64/boot/dts/qcom/lemans-evk-sd-card.dtso

-- 
2.34.1