[PATCH 3/6] phy: rockchip: samsung-hdptx: Drop TMDS rate setup workaround

[Cristian Ciocaltea]

Since commit ba9c2fe18c17 ("drm/rockchip: dw_hdmi_qp: Switch to
phy_configure()") the TMDS rate setup doesn't rely anymore on the
unconventional usage of the bus width, instead it is managed exclusively
through the HDMI PHY configuration API.

Drop the now obsolete workaround to retrieve the TMDS character rate via
phy_get_bus_width() during power_on().

While at it, get rid of the extra call to rk_hdptx_phy_consumer_put() by
moving the statement at the end of the function.

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
---
 drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c | 26 ++++++-----------------
 1 file changed, 6 insertions(+), 20 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
index 14d266c8df5c..b56360b5df78 100644
--- a/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
+++ b/drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
@@ -1655,22 +1655,6 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 	enum phy_mode mode = phy_get_mode(phy);
 	int ret, lane;
 
-	if (mode != PHY_MODE_DP) {
-		if (!hdptx->hdmi_cfg.rate && hdptx->hdmi_cfg.mode != PHY_HDMI_MODE_FRL) {
-			/*
-			 * FIXME: Temporary workaround to setup TMDS char rate
-			 * from the RK DW HDMI QP bridge driver.
-			 * Will be removed as soon the switch to the HDMI PHY
-			 * configuration API has been completed on both ends.
-			 */
-			hdptx->hdmi_cfg.rate = phy_get_bus_width(hdptx->phy) & 0xfffffff;
-			hdptx->hdmi_cfg.rate *= 100;
-		}
-
-		dev_dbg(hdptx->dev, "%s rate=%llu bpc=%u\n", __func__,
-			hdptx->hdmi_cfg.rate, hdptx->hdmi_cfg.bpc);
-	}
-
 	ret = rk_hdptx_phy_consumer_get(hdptx);
 	if (ret)
 		return ret;
@@ -1696,9 +1680,10 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 		rk_hdptx_dp_pll_init(hdptx);
 
 		ret = rk_hdptx_dp_aux_init(hdptx);
-		if (ret)
-			rk_hdptx_phy_consumer_put(hdptx, true);
 	} else {
+		dev_dbg(hdptx->dev, "%s rate=%llu bpc=%u\n", __func__,
+			hdptx->hdmi_cfg.rate, hdptx->hdmi_cfg.bpc);
+
 		if (hdptx->pll_config_dirty)
 			ret = rk_hdptx_pll_cmn_config(hdptx);
 
@@ -1710,11 +1695,12 @@ static int rk_hdptx_phy_power_on(struct phy *phy)
 				ret = rk_hdptx_frl_lcpll_mode_config(hdptx);
 			else
 				ret = rk_hdptx_tmds_ropll_mode_config(hdptx);
-		} else {
-			rk_hdptx_phy_consumer_put(hdptx, true);
 		}
 	}
 
+	if (ret)
+		rk_hdptx_phy_consumer_put(hdptx, true);
+
 	return ret;
 }
 

-- 
2.52.0