Re: [PATCH v1] ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781
From: Matthew Schwartz
Date: Fri Feb 27 2026 - 16:01:06 EST
On 2/27/26 6:46 AM, Shenghao Ding wrote:
> On TAS2781, if the Speaker calibrated impedance is lower than default
> value hard-coded inside the TAS2781, it will cuase vol lower than
> normal. In order to fix this issue, the parameter of SineGainI need
> updating.
>
> Signed-off-by: Shenghao Ding <shenghao-ding@xxxxxx>
Fixes the audio dropout issue from https://lore.kernel.org/all/0ba100d0-9b6f-4a3b-bffa-61abe1b46cd5@xxxxxxxxx/
without a quirk to skip calibration on ROG Xbox Ally X. I also tested on ROG Xbox Ally, but I never experienced
this specific issue on that device.
Tested-by: Matthew Schwartz <matthew.schwartz@xxxxxxxxx>
>
> ---
> v1:
> - Add tas2781_cali_preproc() to check whether the calibrated-impedance is lower than the default value. If so, update the SineGainI.
> - Specify the TAS2781 chipid for cliabrated data preprocessing.
> - Revert b7e26c8bdae7 ("ALSA: hda/tas2781: Skip UEFI calibration on ASUS ROG Xbox Ally X") in tas2781.
> ---
> include/sound/tas2781.h | 1 +
> .../hda/codecs/side-codecs/tas2781_hda_i2c.c | 15 +--
> sound/soc/codecs/tas2781-fmwlib.c | 94 +++++++++++++++++++
> 3 files changed, 98 insertions(+), 12 deletions(-)
>
> diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
> index 7c03bdc951bb..e847cf51878c 100644
> --- a/include/sound/tas2781.h
> +++ b/include/sound/tas2781.h
> @@ -151,6 +151,7 @@ struct tasdevice {
> struct bulk_reg_val *cali_data_backup;
> struct bulk_reg_val alp_cali_bckp;
> struct tasdevice_fw *cali_data_fmw;
> + void *cali_specific;
> unsigned int dev_addr;
> unsigned int err_code;
> unsigned char cur_book;
> diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
> index 74c3cf1e45e1..67240ce184e1 100644
> --- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
> +++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
> @@ -60,7 +60,6 @@ struct tas2781_hda_i2c_priv {
> int (*save_calibration)(struct tas2781_hda *h);
>
> int hda_chip_id;
> - bool skip_calibration;
> };
>
> static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
> @@ -479,8 +478,7 @@ static void tasdevice_dspfw_init(void *context)
> /* If calibrated data occurs error, dsp will still works with default
> * calibrated data inside algo.
> */
> - if (!hda_priv->skip_calibration)
> - hda_priv->save_calibration(tas_hda);
> + hda_priv->save_calibration(tas_hda);
> }
>
> static void tasdev_fw_ready(const struct firmware *fmw, void *context)
> @@ -535,7 +533,6 @@ static int tas2781_hda_bind(struct device *dev, struct device *master,
> void *master_data)
> {
> struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
> - struct tas2781_hda_i2c_priv *hda_priv = tas_hda->hda_priv;
> struct hda_component_parent *parent = master_data;
> struct hda_component *comp;
> struct hda_codec *codec;
> @@ -564,14 +561,6 @@ static int tas2781_hda_bind(struct device *dev, struct device *master,
> break;
> }
>
> - /*
> - * Using ASUS ROG Xbox Ally X (RC73XA) UEFI calibration data
> - * causes audio dropouts during playback, use fallback data
> - * from DSP firmware as a workaround.
> - */
> - if (codec->core.subsystem_id == 0x10431384)
> - hda_priv->skip_calibration = true;
> -
> guard(pm_runtime_active_auto)(dev);
>
> comp->dev = dev;
> @@ -643,6 +632,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
> */
> device_name = "TIAS2781";
> hda_priv->hda_chip_id = HDA_TAS2781;
> + tas_hda->priv->chip_id = TAS2781;
> hda_priv->save_calibration = tas2781_save_calibration;
> tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
> } else if (strstarts(dev_name(&clt->dev), "i2c-TXNW2770")) {
> @@ -656,6 +646,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
> "i2c-TXNW2781:00-tas2781-hda.0")) {
> device_name = "TXNW2781";
> hda_priv->hda_chip_id = HDA_TAS2781;
> + tas_hda->priv->chip_id = TAS2781;
> hda_priv->save_calibration = tas2781_save_calibration;
> tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
> } else if (strstr(dev_name(&clt->dev), "INT8866")) {
> diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c
> index c969eb38704e..5798d518d94c 100644
> --- a/sound/soc/codecs/tas2781-fmwlib.c
> +++ b/sound/soc/codecs/tas2781-fmwlib.c
> @@ -32,6 +32,10 @@
> #define TAS2781_YRAM1_PAGE 42
> #define TAS2781_YRAM1_START_REG 88
>
> +#define TAS2781_PG_REG TASDEVICE_REG(0x00, 0x00, 0x7c)
> +#define TAS2781_PG_1_0 0xA0
> +#define TAS2781_PG_2_0 0xA8
> +
> #define TAS2781_YRAM2_START_PAGE 43
> #define TAS2781_YRAM2_END_PAGE 49
> #define TAS2781_YRAM2_START_REG 8
> @@ -98,6 +102,12 @@ struct blktyp_devidx_map {
> unsigned char dev_idx;
> };
>
> +struct tas2781_cali_specific {
> + unsigned char sin_gni[4];
> + int sin_gni_reg;
> + bool is_sin_gn_flush;
> +};
> +
> static const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = {
> 1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4, 1, 2
> };
> @@ -2454,6 +2464,84 @@ static int tasdevice_load_data(struct tasdevice_priv *tas_priv,
> return ret;
> }
>
> +static int tas2781_cali_preproc(struct tasdevice_priv *priv, int i)
> +{
> + struct tas2781_cali_specific *spec = priv->tasdevice[i].cali_specific;
> + struct calidata *cali_data = &priv->cali_data;
> + struct cali_reg *p = &cali_data->cali_reg_array;
> + unsigned char *data = cali_data->data;
> + int rc;
> +
> + /*
> + * On TAS2781, if the Speaker calibrated impedance is lower than
> + * default value hard-coded inside the TAS2781, it will cuase vol
> + * lower than normal. In order to fix this issue, the parameter of
> + * SineGainI need updating.
> + */
> + if (spec == NULL) {
> + int k = i * (cali_data->cali_dat_sz_per_dev + 1);
> + int re_org, re_cal, corrected_sin_gn, pg_id;
> + unsigned char r0_deflt[4];
> +
> + spec = devm_kzalloc(priv->dev, sizeof(*spec), GFP_KERNEL);
> + if (spec == NULL)
> + return -ENOMEM;
> + priv->tasdevice[i].cali_specific = spec;
> + rc = tasdevice_dev_bulk_read(priv, i, p->r0_reg, r0_deflt, 4);
> + if (rc < 0) {
> + dev_err(priv->dev, "invalid RE from %d = %d\n", i, rc);
> + return rc;
> + }
> + /*
> + * SineGainI need to be re-calculated, calculate the high 16
> + * bits.
> + */
> + re_org = r0_deflt[0] << 8 | r0_deflt[1];
> + re_cal = data[k + 1] << 8 | data[k + 2];
> + if (re_org > re_cal) {
> + rc = tasdevice_dev_read(priv, i, TAS2781_PG_REG,
> + &pg_id);
> + if (rc < 0) {
> + dev_err(priv->dev, "invalid PG id %d = %d\n",
> + i, rc);
> + return rc;
> + }
> +
> + spec->sin_gni_reg = (pg_id == TAS2781_PG_1_0) ?
> + TASDEVICE_REG(0, 0x1b, 0x34) :
> + TASDEVICE_REG(0, 0x18, 0x1c);
> +
> + rc = tasdevice_dev_bulk_read(priv, i,
> + spec->sin_gni_reg,
> + spec->sin_gni, 4);
> + if (rc < 0) {
> + dev_err(priv->dev, "wrong sinegaini %d = %d\n",
> + i, rc);
> + return rc;
> + }
> + corrected_sin_gn = re_org * ((spec->sin_gni[0] << 8) +
> + spec->sin_gni[1]);
> + corrected_sin_gn /= re_cal;
> + spec->sin_gni[0] = corrected_sin_gn >> 8;
> + spec->sin_gni[1] = corrected_sin_gn & 0xff;
> +
> + spec->is_sin_gn_flush = true;
> + }
> + }
> +
> + if (spec->is_sin_gn_flush) {
> + rc = tasdevice_dev_bulk_write(priv, i, spec->sin_gni_reg,
> + spec->sin_gni, 4);
> + if (rc < 0) {
> + dev_err(priv->dev, "update failed %d = %d\n",
> + i, rc);
> + return rc;
> + }
> + }
> +
> + return 0;
> +}
> +
> static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i)
> {
> struct calidata *cali_data = &priv->cali_data;
> @@ -2469,6 +2557,12 @@ static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i)
> }
> k++;
>
> + if (priv->chip_id == TAS2781) {
> + rc = tas2781_cali_preproc(priv, i);
> + if (rc < 0)
> + return;
> + }
> +
> rc = tasdevice_dev_bulk_write(priv, i, p->r0_reg, &(data[k]), 4);
> if (rc < 0) {
> dev_err(priv->dev, "chn %d r0_reg bulk_wr err = %d\n", i, rc);