Re: [syzbot] [libertas?] INFO: task hung in lbs_remove_card

[syzbot]

Hello,

syzbot has tested the proposed patch but the reproducer is still triggering an issue:
INFO: task hung in lbs_remove_card

INFO: task kworker/1:2:705 blocked for more than 143 seconds.
      Not tainted syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/1:2     state:D stack:26328 pid:705   tgid:705   ppid:2      task_flags:0x4288060 flags:0x00080000
Workqueue: usb_hub_wq hub_event
Call Trace:
 <TASK>
 context_switch kernel/sched/core.c:5295 [inline]
 __schedule+0xeb1/0x41f0 kernel/sched/core.c:6907
 __schedule_loop kernel/sched/core.c:6989 [inline]
 schedule+0xdd/0x390 kernel/sched/core.c:7004
 lbs_wait_for_firmware_load+0x190/0x260 drivers/net/wireless/marvell/libertas/firmware.c:127
 lbs_remove_card+0x84/0x390 drivers/net/wireless/marvell/libertas/main.c:913
 if_usb_disconnect+0xaf/0x2e0 drivers/net/wireless/marvell/libertas/if_usb.c:316
 usb_unbind_interface+0x1dd/0x9e0 drivers/usb/core/driver.c:458
 device_remove drivers/base/dd.c:573 [inline]
 device_remove+0x12a/0x180 drivers/base/dd.c:565
 __device_release_driver drivers/base/dd.c:1284 [inline]
 device_release_driver_internal+0x42e/0x600 drivers/base/dd.c:1307
 bus_remove_device+0x22f/0x440 drivers/base/bus.c:616
 device_del+0x376/0x9b0 drivers/base/core.c:3878
 usb_disable_device+0x367/0x810 drivers/usb/core/message.c:1418
 usb_disconnect+0x2e2/0x9a0 drivers/usb/core/hub.c:2345
 hub_port_connect drivers/usb/core/hub.c:5407 [inline]
 hub_port_connect_change drivers/usb/core/hub.c:5707 [inline]
 port_event drivers/usb/core/hub.c:5871 [inline]
 hub_event+0x1d0c/0x4af0 drivers/usb/core/hub.c:5953
 process_one_work+0x9d7/0x1920 kernel/workqueue.c:3275
 process_scheduled_works kernel/workqueue.c:3358 [inline]
 worker_thread+0x5da/0xe40 kernel/workqueue.c:3439
 kthread+0x370/0x450 kernel/kthread.c:467
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>

Showing all locks held in the system:
2 locks held by kworker/0:1/10:
 #0: ffff88810006b548 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1287/0x1920 kernel/workqueue.c:3250
 #1: ffffc900000afd18 ((work_completion)(&fw_work->work)){+.+.}-{0:0}, at: process_one_work+0x93c/0x1920 kernel/workqueue.c:3251
1 lock held by khungtaskd/30:
 #0: ffffffff896e05a0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:312 [inline]
 #0: ffffffff896e05a0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:850 [inline]
 #0: ffffffff896e05a0 (rcu_read_lock){....}-{1:3}, at: debug_show_all_locks+0x3d/0x184 kernel/locking/lockdep.c:6775
5 locks held by kworker/1:2/705:
 #0: ffff888105eac148 ((wq_completion)usb_hub_wq){+.+.}-{0:0}, at: process_one_work+0x1287/0x1920 kernel/workqueue.c:3250
 #1: ffffc90001fbfd18 ((work_completion)(&hub->events)){+.+.}-{0:0}, at: process_one_work+0x93c/0x1920 kernel/workqueue.c:3251
 #2: ffff88810b76a198 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:895 [inline]
 #2: ffff88810b76a198 (&dev->mutex){....}-{4:4}, at: hub_event+0x1bd/0x4af0 drivers/usb/core/hub.c:5899
 #3: ffff888106382198 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:895 [inline]
 #3: ffff888106382198 (&dev->mutex){....}-{4:4}, at: usb_disconnect+0x10a/0x9a0 drivers/usb/core/hub.c:2336
 #4: ffff888115d0a160 (&dev->mutex){....}-{4:4}, at: device_lock include/linux/device.h:895 [inline]
 #4: ffff888115d0a160 (&dev->mutex){....}-{4:4}, at: __device_driver_lock drivers/base/dd.c:1106 [inline]
 #4: ffff888115d0a160 (&dev->mutex){....}-{4:4}, at: device_release_driver_internal+0xaa/0x600 drivers/base/dd.c:1304
2 locks held by getty/2917:
 #0: ffff888115b8b0a0 (&tty->ldisc_sem){++++}-{0:0}, at: tty_ldisc_ref_wait+0x24/0x80 drivers/tty/tty_ldisc.c:243
 #1: ffffc900000432f0 (&ldata->atomic_read_lock){+.+.}-{4:4}, at: n_tty_read+0x419/0x1500 drivers/tty/n_tty.c:2211

=============================================

NMI backtrace for cpu 1
CPU: 1 UID: 0 PID: 30 Comm: khungtaskd Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:94 [inline]
 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120
 nmi_cpu_backtrace.cold+0x12d/0x151 lib/nmi_backtrace.c:113
 nmi_trigger_cpumask_backtrace+0x1d7/0x230 lib/nmi_backtrace.c:62
 trigger_all_cpu_backtrace include/linux/nmi.h:161 [inline]
 __sys_info lib/sys_info.c:157 [inline]
 sys_info+0x141/0x190 lib/sys_info.c:165
 check_hung_uninterruptible_tasks kernel/hung_task.c:346 [inline]
 watchdog+0xd25/0x1050 kernel/hung_task.c:515
 kthread+0x370/0x450 kernel/kthread.c:467
 ret_from_fork+0x6c3/0xcb0 arch/x86/kernel/process.c:158
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
 </TASK>
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted syzkaller #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:pv_native_safe_halt+0xf/0x20 arch/x86/kernel/paravirt.c:63
Code: ae b1 01 e9 13 e8 02 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 66 90 0f 00 2d d3 e1 1d 00 fb f4 <c3> cc cc cc cc 66 2e 0f 1f 84 00 00 00 00 00 66 90 90 90 90 90 90
RSP: 0018:ffffffff89407e10 EFLAGS: 00000242
RAX: 00000000000f7031 RBX: ffffffff8942ea40 RCX: ffffffff876898d5
RDX: 0000000000000000 RSI: ffffffff8901db96 RDI: ffffffff87afa420
RBP: 0000000000000000 R08: 0000000000000001 R09: ffffed103eac6725
R10: ffff8881f563392b R11: 0000000000000000 R12: fffffbfff1285d48
R13: 0000000000000000 R14: ffffffff8aefe2d0 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff8882686d3000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fe3889f5900 CR3: 00000001323d4000 CR4: 00000000003506f0
Call Trace:
 <TASK>
 arch_safe_halt arch/x86/include/asm/paravirt.h:73 [inline]
 default_idle+0x9/0x10 arch/x86/kernel/process.c:767
 default_idle_call+0x6c/0xb0 kernel/sched/idle.c:122
 cpuidle_idle_call kernel/sched/idle.c:191 [inline]
 do_idle+0x35b/0x4b0 kernel/sched/idle.c:332
 cpu_startup_entry+0x4f/0x60 kernel/sched/idle.c:430
 rest_init+0x251/0x260 init/main.c:760
 start_kernel+0x47a/0x480 init/main.c:1210
 x86_64_start_reservations+0x24/0x30 arch/x86/kernel/head64.c:310
 x86_64_start_kernel+0x12b/0x130 arch/x86/kernel/head64.c:291
 common_startup_64+0x13e/0x148
 </TASK>


Tested on:

commit:         bb375c25 dt-bindings: usb: st,st-ohci-300x: convert to..
git tree:       https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git usb-testing
console output: https://syzkaller.appspot.com/x/log.txt?x=1168d55a580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=f1500201919951cc
dashboard link: https://syzkaller.appspot.com/bug?extid=c99d17aa44dbdba16ad2
compiler:       gcc (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44
patch:          https://syzkaller.appspot.com/x/patch.diff?x=10122202580000