[PATCH] arm64: dts: qcom: sc8280xp: use refgen regulator for DSI

[Pengyu Luo]

Use it for the DSI controllers, since DSI nodes have been added.

Signed-off-by: Pengyu Luo <mitltlatltl@xxxxxxxxx>
---
This patch depends on the below series:
https://lore.kernel.org/linux-arm-msm/20260228101907.18043-1-mitltlatltl@xxxxxxxxx/
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 79021267d..1599d698b 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -4843,6 +4843,8 @@ mdss0_dsi0: dsi@ae94000 {
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
+				refgen-supply = <&refgen>;
+
 				phys = <&mdss0_dsi0_phy>;
 				phy-names = "dsi";
 
@@ -4942,6 +4944,8 @@ mdss0_dsi1: dsi@ae96000 {
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
+				refgen-supply = <&refgen>;
+
 				phys = <&mdss0_dsi1_phy>;
 				phy-names = "dsi";
 
@@ -6398,6 +6402,8 @@ mdss1_dsi0: dsi@22094000 {
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
+				refgen-supply = <&refgen>;
+
 				phys = <&mdss1_dsi0_phy>;
 				phy-names = "dsi";
 
@@ -6478,6 +6484,8 @@ mdss1_dsi1: dsi@22096000 {
 				operating-points-v2 = <&dsi_opp_table>;
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
+				refgen-supply = <&refgen>;
+
 				phys = <&mdss1_dsi1_phy>;
 				phy-names = "dsi";
 
-- 
2.53.0