Re: [PATCH 1/1] scsi: virtio_scsi: move INIT_WORK calls to virtscsi_init

[Eric Farman]

On Thu, 2026-02-26 at 21:43 +0100, Joshua Daley wrote:
> The last step of virtscsi_handle_event is to call virtscsi_kick_event,
> which calls INIT_WORK on it's own work item. INIT_WORK resets the
> work item's data bits to 0.
> 
> If this occurs while the work item is being flushed by
> cancel_work_sync, then kernel/workqueue.c/work_offqd_enable triggers a
> kernel warning, as it expects the "disable" bit to be 1:
> 
> [   21.450115] workqueue: work disable count underflowed
> [   21.450117] WARNING: CPU: 1 PID: 56 at kernel/workqueue.c:4328 enable_work+0x10a/0x120
> ...
> [   21.450171] Call Trace:
> [   21.450173]  [<000003db2e5bdc3e>] enable_work+0x10e/0x120
> [   21.450176] ([<000003db2e5bdc3a>] enable_work+0x10a/0x120)
> [   21.450178]  [<000003db2e5bdd86>] cancel_work_sync+0x86/0xa0
> [   21.450181]  [<000003daae97d9e4>] virtscsi_remove+0xb4/0xd0 [virtio_scsi]
> [   21.450184]  [<000003db2ef3b5ca>] virtio_dev_remove+0x6a/0xd0
> [   21.450186]  [<000003db2ef9106c>] device_release_driver_internal+0x1ac/0x260
> [   21.450190]  [<000003db2ef8edc8>] bus_remove_device+0xf8/0x190
> [   21.450192]  [<000003db2ef88d72>] device_del+0x142/0x340
> [   21.450194]  [<000003db2ef88fa0>] device_unregister+0x30/0xa0
> [   21.450196]  [<000003db2ef3b2fa>] unregister_virtio_device+0x2a/0x40
> 
> This warning may occur if a controller is detached immediately
> following a disk detach.
> 
> Move the INIT_WORK call to prevent this. Don't re-init event list
> work items in virtscsi_kick_event, init them only once in
> virtscsi_init instead.
> 
> Signed-off-by: Joshua Daley <jdaley@xxxxxxxxxxxxx>

The fact that the INIT_WORK points to virtscsi_handle_event(), which itself calls
virtscsi_kick_event() and re-inits the workqueue struct today, does seem odd. Moving this to _init,
as part of the _probe() process, seems correct to me. One nit below, but FWIW:

Reviewed-by: Eric Farman <farman@xxxxxxxxxxxxx>
Tested-by: Eric Farman <farman@xxxxxxxxxxxxx>

> ---
>  drivers/scsi/virtio_scsi.c | 6 +++++-
>  1 file changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
> index 0ed8558dad72..173092931df6 100644
> --- a/drivers/scsi/virtio_scsi.c
> +++ b/drivers/scsi/virtio_scsi.c
> @@ -242,7 +242,6 @@ static int virtscsi_kick_event(struct virtio_scsi *vscsi,

Just before this hunk is a prototype for virtscsi_handle_event(), since it was previously used in
this function but defined afterwards. I suspect it can be removed now?

>  	struct scatterlist sg;
>  	unsigned long flags;
>  
> -	INIT_WORK(&event_node->work, virtscsi_handle_event);
>  	sg_init_one(&sg, event_node->event, sizeof(struct virtio_scsi_event));
>  
>  	spin_lock_irqsave(&vscsi->event_vq.vq_lock, flags);
> @@ -898,6 +897,11 @@ static int virtscsi_init(struct virtio_device *vdev,
>  	virtscsi_config_set(vdev, cdb_size, VIRTIO_SCSI_CDB_SIZE);
>  	virtscsi_config_set(vdev, sense_size, VIRTIO_SCSI_SENSE_SIZE);
>  
> +	if (virtio_has_feature(vdev, VIRTIO_SCSI_F_HOTPLUG)) {
> +		for (i = 0; i < VIRTIO_SCSI_EVENT_LEN; i++)
> +			INIT_WORK(&vscsi->event_list[i].work, virtscsi_handle_event);
> +	}
> +
>  	err = 0;
>  
>  out: