Re: [PATCH v4 2/2] media: i2c: mt9m114: add support for Aptina MI1040

[johannes . goede]

Hi,

On 5-Mar-26 11:21, Svyatoslav Ryhel wrote:
> Slightly different version of MT9M114 camera module is used in a several
> devices like ASUS Nexus 7 (2012) or ASUS Transformer Prime TF201 and is
> called Aptina MI1040. The only difference found so far is lacking ability
> to poll STATE register during power on sequence, which causes driver to
> fail with time out error. Add state_standby_polling flag to diverge models
> and address quirk found in MI1040.
> 
> Signed-off-by: Svyatoslav Ryhel <clamor95@xxxxxxxxx>

Thanks, patch looks good to me:

Reviewed-by: Hans de Goede <johannes.goede@xxxxxxxxxxxxxxxx>

Regards,

Hans


> ---
>  drivers/media/i2c/mt9m114.c | 35 ++++++++++++++++++++++++++++-------
>  1 file changed, 28 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c
> index 16b0ace15813..e395e2d14e97 100644
> --- a/drivers/media/i2c/mt9m114.c
> +++ b/drivers/media/i2c/mt9m114.c
> @@ -368,6 +368,10 @@
>   * Data Structures
>   */
>  
> +struct mt9m114_model_info {
> +	bool state_standby_polling;
> +};
> +
>  enum mt9m114_format_flag {
>  	MT9M114_FMT_FLAG_PARALLEL = BIT(0),
>  	MT9M114_FMT_FLAG_CSI2 = BIT(1),
> @@ -417,6 +421,8 @@ struct mt9m114 {
>  
>  		struct v4l2_ctrl *tpg[4];
>  	} ifp;
> +
> +	const struct mt9m114_model_info *info;
>  };
>  
>  /* -----------------------------------------------------------------------------
> @@ -2284,9 +2290,11 @@ static int mt9m114_power_on(struct mt9m114 *sensor)
>  	 * reaches the standby mode (either initiated manually above in
>  	 * parallel mode, or automatically after reset in MIPI mode).
>  	 */
> -	ret = mt9m114_poll_state(sensor, MT9M114_SYS_STATE_STANDBY);
> -	if (ret < 0)
> -		goto error_clock;
> +	if (sensor->info->state_standby_polling) {
> +		ret = mt9m114_poll_state(sensor, MT9M114_SYS_STATE_STANDBY);
> +		if (ret < 0)
> +			goto error_clock;
> +	}
>  
>  	return 0;
>  
> @@ -2532,6 +2540,10 @@ static int mt9m114_probe(struct i2c_client *client)
>  	if (ret < 0)
>  		return ret;
>  
> +	sensor->info = device_get_match_data(dev);
> +	if (!sensor->info)
> +		return -ENODEV;
> +
>  	/* Acquire clocks, GPIOs and regulators. */
>  	sensor->clk = devm_v4l2_sensor_clk_get(dev, NULL);
>  	if (IS_ERR(sensor->clk)) {
> @@ -2646,15 +2658,24 @@ static void mt9m114_remove(struct i2c_client *client)
>  	pm_runtime_set_suspended(dev);
>  }
>  
> +static const struct mt9m114_model_info mt9m114_models_default = {
> +	.state_standby_polling = true,
> +};
> +
> +static const struct mt9m114_model_info mt9m114_models_aptina = {
> +	.state_standby_polling = false,
> +};
> +
>  static const struct of_device_id mt9m114_of_ids[] = {
> -	{ .compatible = "onnn,mt9m114" },
> -	{ /* sentinel */ },
> +	{ .compatible = "onnn,mt9m114", .data = &mt9m114_models_default },
> +	{ .compatible = "aptina,mi1040", .data = &mt9m114_models_aptina },
> +	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mt9m114_of_ids);
>  
>  static const struct acpi_device_id mt9m114_acpi_ids[] = {
> -	{ "INT33F0" },
> -	{ /* sentinel */ },
> +	{ "INT33F0", (kernel_ulong_t)&mt9m114_models_default },
> +	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(acpi, mt9m114_acpi_ids);
>